Remove/Install Front Floor Covering On Front Passenger Side - AR68.80-P-0008S

Model 223 

MODIFICATION NOTES

14.10.2020

Check for correct seat of condensation drain hoses at air conditioner housing and at body opening, added

Operation step 6

Courtesy of MERCEDES-BENZ USA

	Notes on safety-relevant components		AH00.00-Z-0019-01A
	Remove/install
1	Remove floor mat (2).
2	Remove door sill (3).	Long wedge	Fig 1
3	Remove trim below instrument panel on passenger side.		AR68.10-P-1502S
4	Release front passenger seat (4) and tilt toward rear.		AR91.10-P-1000S
		Do not disconnect electrical connectors.
5	Remove floor covering (1) from the front to the rear.	Position floor covering (1) under center console (5).
		Long wedge	Fig 1
6	Check for correct seat of condensation drain hoses at air conditioner housing and at body opening.		AR83.30-P-5200-03A
7	Install in the reverse order.

Fig 1: Identifying Long Wedge (115 589 03 59 00)

Courtesy of MERCEDES-BENZ USA