Remove/Install Instrument Cluster Control Unit - AR54.30-P-7101S
Model 223
| Topical note | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Remove/install | |||
| 1 | Commission instrument cluster control unit (N133/1). | If the instrument cluster control unit (N133/1) is replaced. | |
| AD00.00-P-2000-06FR | |||
| 2 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m). | ||
| 3 | Remove glove compartment housing. | AR68.10-P-1400S | |
| 4 | Remove bolts (1). | ||
| 5 | Release and disconnect electrical connectors (2). | ||
| 6 | Remove instrument cluster control unit (N133/1). | ||
| 7 | Install in the reverse order. |