Remove/Install Glove Compartment - AR68.10-P-1400S
Model 223
Shown with code P21 (Air quality package)
| Topical note | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Remove/install | |||
| 1 | Remove trim element at instrument panel at front passenger side. | AR68.10-P-1187S | |
| 2 | Remove bottom trim for instrument panel on front passenger side. | AR68.10-P-1502S | |
| 3 | Remove SIM card reader. | Model 223 with code 380 (Car telephony package) |
AR82.85-P-7369S |
| 4 | Remove TV card reader. | Model 223 with code 865 (digital TV) |
AR82.85-P-7367S |
| 5 | Remove screws (1). | ||
| 6 | Open glove compartment housing (2). | Model 223 except code 380 (Car telephony package) except code 865 (digital TV) |
|
| 7 | Remove screws (3). | ||
| 8 | Remove glove compartment housing (2) until electrical connectors (4, 5) at rear can be accessed. | ||
| 9 | Release and disconnect electrical connector (4). | ||
| 10 | Release and disconnect electrical connector (5). | Model 223 with code P21 (Air quality package) |
|
| 11 | Remove air duct (6) from glove compartment housing (2). | ||
| 12 | Remove hose line (7) from glove compartment housing (2). | Model 223 with code P21 (Air quality package) |
|
| 13 | Remove glove compartment housing (2). | ||
| 14 | Install in the reverse order. |