Remove/Install Inner Paneling On Sliding Door Window Frame - AR72.16-S-6613E
Model 447.7, 448.7
With Code V23 (Interior trim, premium version)
Model 447.8, 448.8
Shown On model 447.8
| Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | AS00.00-Z-0011-01A | |
| Notice | Notes on carrying out repair work in the vehicle interior | AH68.00-D-0001-01KOS | |
| Remove/install | |||
| 1 | Remove front curtain from door lock actuation | Model 447.7 with code ZH6 (Marco Polo ACTIVITY) | |
| 2 | Unclip paneling (1) from retaining clips (2) and remaining clips in sliding door and remove | Remove paneling (1) together with curtain. |
Fig 1 |
| 3 | Remove curtain from paneling (1) | Model 447.7 with code ZH6 (Marco Polo ACTIVITY) When replacing trim (1). |
AR68.50-S-7816E |
| 4 | Prepare paneling (1) for installation | Model 447.7 with code ZH6 (Marco Polo ACTIVITY) When replacing trim (1). |
AR68.30-S-0111-01E |
| Check | |||
| 5 | Check retaining clips (2) and retaining clamps for fastening paneling (1) for damage | for damage ↓ Replace retaining clips (2) or retaining clamps |
|
| 6 | Install in the reverse order |