Remove/Install D-Pillar Trim - AR68.30-P-4497MEM
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2025 Mercedes-Benz Maybach GLS600, 2025 Mercedes-Benz GLS63 AMG, 2024 Mercedes-Benz Maybach GLS600, 2024 Mercedes-Benz GLS63 AMG, and 2023 Mercedes-Benz Maybach GLS600. However, it is still accessible from the selected car via links, so may be relevant.
Model 167.9
With Code M036 (Maybach version)
Shown on the left side of vehicle
| Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | AS00.00-Z-0011-01A | |
| Notes on HANDS-FREE ACCESS | AH80.61-P-0001-01A | ||
| Remove/install | |||
| 1 | Remove rear shelf. | AR68.30-P-4581MEX | |
| 2 | Remove cover (1). | ||
| 3 | Remove screw (2). | ||
| 4 | Release edge guard (3) in area of D-pillar trim (4). | ||
| 5 | Unclip D-pillar trim (4) (arrows) and remove toward rear. | Fig 1 | |
| 6 | Install in the reverse order. |