Remove/Install ABS Measuring Ring - AR42.30-P-0160GW

Model 463 (except 463.270/271) 

as of model year 2013 up to model year 2019 

Fig 1: ABS Measuring Ring Components Location - Model 463 As Of Model Year 2016 Up To Model Year 2019

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove rear axle shaft (2)	Remove/install rear axle shaft	AR35.30-P-0620GW
2	Disassemble rear axle shaft (2)	Disassemble/assemble rear axle shaft	AR35.30-P-7351GW
3	Clamp in rear axle shaft (2)
	Detach ABS measuring ring (1) using suitable tool from rear axle shaft	Heat up new ABS measuring ring (1) to approx. 80°C and use suitable tool to press onto rear axle shaft (2).
4	Install in the reverse order