Remove/Install Front Floor Covering (Right) - AR68.20-P-2070LW
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 205
Model 253
Shown on MODEL 205.### 1#
| Remove/install | |||
| 1 | Adjust steering column toward rear and completely upward | Model 205.### 2#, 253.### 2# | |
| 2 | Release front seat and tilt backwards | Model 205.0/1/2/3, 253 | AR91.10-P-1000LW |
| Model 205.4 |
AR91.10-P-1000LWR | ||
| 3 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m) | Model 205.### 2#, 253.### 2# | |
| 4 | Remove cover below dashboard | Model 205.### 2#, 253.### 2# | AR68.10-P-1500LW |
| Model 205.### 1#, 253.### 1# | AR68.10-P-1520LW | ||
| 5 | Remove accelerator pedal | Model 205.### 2#, 253.### 2# | AR30.12-P-1321LF |
| 6 | Remove door sill molding (2) | Model 205.0/1/2, 253 | AR68.30-P-4100LW |
| Model 205.3/4 | AR68.30-P-4100CLW | ||
| 7 | Remove floor covering (1) from front to rear | Fig 1 | |
| 8 | Install in the reverse order |