Remove/Install Cover Below Instrument Panel (Right) - AR68.10-P-1520LW

WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.

Model 205

Model 253

Shown on model 205 with code 876 (Interior lights package) and with code 494 (USA version)

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Adjust right front seat toward rear to end position
2	Switch off ignition and remove transmitter key
3	Unscrew screws/bolts (2)	Model 253 Only one bolt (2) is installed in the center. Model 205 except code 494 (US version) Only the right bolt (2) is installed.
4	Unclip cover (1) from retaining clips (3), unhook from hook (5) and lower (arrow)	Mounting wedge	Fig 1
5	Disconnect electrical connector (6)
6	Disconnect electrical connector (4)	Model 205, 253 with code 876 (Interior Light package)
7	Take off cover (1)
8	Transfer right footwell vent air outlet temperature sensor (B10/36)	When replacing cover (1).
9	Transfer right front footwell lamp (E17/15)	Model 205, 253 with code 876 (Interior Light package) When replacing cover (1).
10	Install in the reverse order

Fig 1: Identifying Mounting Wedge (110 589 03 59 00)

Courtesy of MERCEDES-BENZ USA