Carry Out Distance And Comparison Measurements On Front And Rear Axles - AR40.30-P-0402RK

Model 217, 222, 231 

	Risk of death  caused by vehicle slipping or toppling off during lifting	Only lift vehicle at the lift support points specified by the vehicle manufacturer.	AS00.00-Z-0032-01A
	Risk of death  caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
	Check
1	Drive vehicle onto lifting platform.
2	Perform initial accident diagnosis	Model 217, 222, 231 Model 217.3 Model 222	AR60.00-P-1105LF
3	Carry out distance and comparison measurements on front and rear axles
	000 588 01 23 00 Body straightening system	Distance and comparative measurement at the front and rear axle using the "beam trammel" measurement method is not permitted. These measurements determine whether it is necessary to replace chassis components or repair the body on the straightening bench. If there is visible damage (e.g. crack formation or deformation) on the front axle or rear axle carrier, these parts must be replaced.	WS60.00-P-0023K
4	Repair vehicle	Where damage has been detected.
5	Perform wheel alignment check	If the vehicle has been repaired. Model 217, 222	AR40.20-P-0200LF
		Model 231	AR40.20-P-0200R