LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2019 >> C300 4Matic, 2D Convertible >> Repair and Diagnosis >> Restraints >> Seat Belts >> Seats, Bunks, Restraint Systems - 205 Chassis 2 Of 3 >> Testing & Repair >> Remove/Install Front Seat Side Airbag Unit >> Remove/Install Front Seat Side Airbag Unit - AR91.60-P-0695LF

Remove/Install Front Seat Side Airbag Unit - AR91.60-P-0695LF

Model 205, 213, 253 

except code 555 (AMG-Performance Seat) 

Model 217, 222, 238, 293 

MODIFICATION NOTES

08.11.2018 Special tool added. Operation step 3  
Fig 1: Front Seat Side Airbag Unit Components Location - Model 205 Except Code 555, Shown On Model 222 With Removed Front Seat
G14197832Courtesy of MERCEDES-BENZ USA

Shown on Model 222 with removed front seat 

WARNING Risk of injury  during testing and repair operations related to pyrotechnical components Do not expose pyrotechnical component parts to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such component parts. AS91.00-Z-0008-01A
Topical note Information on preventing damage to electronic components due to electrostatic discharge   AH54.00-P-0001-01A
  Notes on safety-relevant components   AH00.00-Z-0019-01A
  Information, assessment and legal requirements when working with, handling and storing pyrotechnical components   AH91.00-Z-0000-10A
REMOVINGINSTALLING Remove/Install     
1 Remove seat backrest trim from left or right seat backrest (3). Model 205.0/1/2, 213, 253 except code 555 (AMG-Performance Seat)
 
Model 293
AR91.10-P-1912LW 
    Model 205.3/4 except code 555 (AMG-Performance Seat)
 
Model 238
AR91.10-P-1912CLW 
    Model 217, 222 AR91.10-P-1910LF
2 Disconnect ground line from battery. Model 205, 213, 253 except code 555 (AMG-Performance Seat) AR54.10-P-0003LW
    Model 217, 222 AR54.10-P-0003LF
    Model 238 AR54.10-P-0003LWO
    Model 293 AR54.10-P-0003EQ
3 Release and disconnect electrical connector (2) at side bag unit (1). INSTALLATION IMPORTANT
Ensure correct engagement of electrical connector (2) at side airbag unit (1).
SPECIAL TOOL
Removal lever
Fig 2
4 Unscrew nut (5). TORQUE SPECIFICATION
Model 217, 222 Nut, center airbag/side airbag to seat backrest frame
*BA91.60-P-1010-01I 
    TORQUE SPECIFICATION
Model 205, 213, 253 except code 555 (AMG-Performance Seat)
 
Model 238, 293 Nut, side bag unit to backrest frame
*BA91.60-P-1006-01O 
5 Unscrew nut (6) and remove ground line (7). IMPORTANT
Model 205, 213, 253 except code 555 (AMG-Performance Seat)
 
Model 238, 293 Ground line (7) is secured to nut (6).
IMPORTANT
Observe installation position of ground line (7).
 
    TORQUE SPECIFICATION
Model 217, 222 Nut, center airbag/side airbag to seat backrest frame
*BA91.60-P-1010-01I 
    TORQUE SPECIFICATION
Model 205, 213, 253 except code 555 (AMG-Performance Seat)
 
Model 238, 293 Nut, side bag unit to backrest frame
*BA91.60-P-1006-01O 
6 Remove side airbag unit (1) from backrest frame (4).    
7 Install in the reverse order    
INSPECT Check     
8 Check Supplemental Restraint System (SRS) using vehicle diagnosis system. When replacing the side airbag unit (1).  
REFER TO SELF-DIAGNOSTIC SYSTEMS   Model 293 AD00.00-P-2000-06FR
REFER TO SELF-DIAGNOSTIC SYSTEMS   Model 205, 213, 253 except code 555 (AMG-Performance Seat)
 
Model 217, 222
AD00.00-P-2000-04B
REFER TO SELF-DIAGNOSTIC SYSTEMS   Model 238 AD00.00-P-2000-06LWO
AIRBAG

Number Designation Model 205.0/1/2/3 Model 205.4
BA91.60-P-1006-01O Nut, side bag unit to backrest frame Nm 7 7
AIRBAG

Number Designation Model 213 Model 238
BA91.60-P-1006-01O Nut, side bag unit to backrest frame Nm 7 6
AIRBAG

Number Designation Model 253 Model 293
BA91.60-P-1006-01O Nut, side bag unit to backrest frame Nm 7 7
AIRBAG

Number Designation Model 217 Model 222
BA91.60-P-1010-01I Nut, center airbag/side airbag to seat backrest frame Nm 6 6
Fig 2: Identifying Removal Lever (203 589 04 33 00)
G14197833Courtesy of MERCEDES-BENZ USA