Overview Of Vehicle-Specific Additional Operations Not Controlled Via Workshop Code - AP00.20-P-0047U
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 117, 118, 156, 164, 166, 167, 169, 171, 172, 176, 177, 190, 197.3/4, 203, 204, 205, 206, 207, 209, 211, 212, 213, 216, 217, 218, 219, 221, 222, 223, 230, 231, 232, 238, 242, 243, 245, 246, 247, 251, 253, 257, 290, 292, 293, 295, 297, 61, 463
| Check ex-factory driving aids at every service | |||
| Overview of checking of ex-factory driving aids, on veh. with code 45P | Model 156, 169, 172, 176, 177, 204, 205, 206, 207, 212, 213, 218, 221, 222, 223, 238, 243, 245, 246, 247, 253, 257 with code 45P (Disability conversion - Sales control code) Select or deselect additional operations for the ex-factory driving aids manually in the MSS workflow under "Define additional operations". |
AP86.20-P-8649U | |
| In ECE countries, replace dust filter if more than 25, 000 km (15, 500 mi) or 2 years have elapsed since last change | |||
| Replace dust filter for heating/air conditioning | Model 167 Select or deselect additional operations for replacing the dust filter manually in the MSS workflow under "Define additional operations". |
AP83.00-P-8381D | |
| Replace dust filter for heating/air conditioning | Model 205 Select or deselect additional operations for replacing the dust filter manually in the MSS workflow under "Define additional operations". |
AP83.00-P-8381B | |
| Replace dust filter for heating/air conditioning | Model 206 Select or deselect additional operations for the ex-factory driving aids manually in the MSS workflow under "Define additional operations". |
AP83.00-P-8381J | |
| Replace dust filter for heating/air conditioning | Model 213, 238, 253, 257, 290 Select or deselect additional operations for replacing the dust filter manually in the MSS workflow under "Define additional operations". |
AP83.00-P-8381C | |
| Replace dust filter for heating/air conditioning | Model 223 Select or deselect additional operations for replacing the dust filter manually in the MSS workflow under "Define additional operations". |
AP83.00-P-8381I | |
| Replace dust filter for heating/air conditioning | Model 232 Select or deselect additional operations for replacing the dust filter manually in the MSS workflow under "Define additional operations". |
AP83.00-P-8381K | |
| Perform gas system test, for first time after 3 years, then every 2 years | |||
| Perform special service, gas system test | Model 253.99 Select or deselect additional operation for special service, perform gas system test, manually in the MSS workflow under "Specify additional operations". |
AP00.20-P-1310E | |
| Check the manufacturing date of the gas cylinders, for the first time after 7 years, and then annually | |||
| Check manufacture date of gas cylinders | Model 253.99 Select or deselect additional operation for checking the manufacturing date of the gas cylinders manually in the MSS workflow under "Specify additional operations". |
AP47.10-P-1201E | |
| Replace gas cylinders at the latest every 10 years or if 10 years will be reached or exceeded during the next service interval | |||
| Replace gas cylinder | Model 253.99 Select or deselect additional operations for replacing the gas cylinders manually in the MSS workflow under "Specify additional operations". |
AP47.10-P-1205E |