Remove/Install Front Door Lock - AR72.10-P-4011CLW

Model 205.3/4 

Fig 1: Front Door Lock Components Location - Model 205.3/4; Shown On Right Side Of Vehicle On Model 205.3

Courtesy of MERCEDES-BENZ USA

Shown on right side of vehicle on Model 205.3 

Courtesy of MERCEDES-BENZ USA

Shown on left door lock (1) 

	Remove/install
1	Take off outside door handle		AR72.10-P-2400LW
2	Remove window from front door		AR72.10-P-1910CLW
3	Remove headbag	Model 205.4	AR91.60-P-0697LWR
4	Unscrew screws/bolts (2)
5	Disconnect electrical connection (3)
6	Disconnect electrical connector (4)
7	Disconnect electrical connector (5) and detach electrical connector socket (6)
8	Completely unclip electrical wiring harness (7)	Clip remover	Fig 2
9	Unclip retaining clip (8)	Clip remover	Fig 2
10	Unclip cover (9) from door and remove	Mounting wedge	Fig 3
11	Remove adhesive tape (10) ad unscrew nuts (11) below	Replace masking tape (10).
		Bolt/nut, power window lifter of side windows to inner panel	*BA67.30-P-1002-01B
12	Unscrew nut (12)	Bolt/nut, power window lifter of side windows to inner panel	*BA67.30-P-1002-01B
13	Press retaining clips (13) into door
14	Remove power window from working area
15	Remove bolts (14)
16	Remove screws/bolts (15)	Screw/bolt, door lock to front door	*BA72.10-P-1005-01W
17	Remove grommet (16)
18	Unhook locking bar (17) from door lock (1) and remove
19	Remove door lock (1)
20	Install in the reverse order

Fig 2: Identifying Clip Remover (452 589 01 63 00)

Courtesy of MERCEDES-BENZ USA

Fig 3: Identifying Mounting Wedge (110 589 03 59 00)

Courtesy of MERCEDES-BENZ USA