Collision - Rear Wall And Rear End (222 Chassis)

• Rear Wall And Rear End Body Repair Description And Operation
  • Service Information: Adhesive Kit For Spare Wheel Well - Si64.20-P-0003A
• Rear Wall And Rear End Body Repair General Information
  • General Notes: Passenger Cars: Rear Wall And Rear End - Ah64.00-Z-9999AZ
• Rear Wall And Rear End Body Repair
  • Cut Off Rear End Center Assembly - Ar64.20-P-1000-02LF
  • Prepare Bottom Rear Center Section For Installation - Ar64.20-P-1000-07LF
  • Replace Complete Bottom Rear Center Section - Ar64.20-P-1000LF
  • Install Rear Center Section - Ar64.20-P-1050-04LF
  • Replace Bottom Rear Center Section Together With Rear CROSSMEMBER - Ar64.20-P-1060LF
  • Remove Rear CROSSMEMBER - Ar64.20-P-1100-01LF
  • Prepare Rear CROSSMEMBER For Installation - Ar64.20-P-1100-02LF
  • Install Rear CROSSMEMBER - Ar64.20-P-1100-05LF
  • Remove Longitudinal Member At Rear - Ar64.20-P-1200-22LF
  • Prepare Rear Longitudinal Member For Installation - Ar64.20-P-1200-23LF
  • Install Rear Longitudinal Member - Ar64.20-P-1200-24LF
  • Repair Rear End On Left Side - Ar64.20-P-1200LF
  • Completely Remove/Install Rear Longitudinal Member - Ar64.20-P-1220LF
  • Remove Spare Tire Well - Ar64.20-P-1245-01LF
  • Prepare Spare Tire Well - Ar64.20-P-1245-02LF
  • Install Spare Tire Well - Ar64.20-P-1245-03LF
  • Replace Spare Tire Well - Ar64.20-P-1245LF
  • Partially Remove Rear Longitudinal Member - Ar64.20-P-1260-01LF
  • Prepare Rear Longitudinal Member Section - Ar64.20-P-1260-02LF
  • Install Rear Longitudinal Member Section - Ar64.20-P-1260-03LF
• Rear Wall And Rear End Body Repair Torque Specifications
  • Tightening Torques: Passenger Cars: Rear Wall And Rear End - BA64.00-Z-9999AZ
  • Tightening Torques: Passenger Cars: Rear Panel - BA64.10-P-1000-01E
• Rear Wall And Rear End Body Repair Special Tools
  • 201 589 00 27 00 Cross-Brace - WS64.00-P-0012K