Remove/Install Engine Hood Lifter - AR91.60-P-0900GQ
Model 166, 292
with code U60 (Active Bonnet (Pedestrian protection))
| Risk of injury caused by performing testing and repair work on engine hood lifter | Store pyrotechnical engine hood lifters with deployment side to one side, do not expose to any temperatures in excess of 100°C. When working on this unit, disconnect the power supply. | AS91.00-Z-0007-01A | |
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Notes on performing repair, body work and welding on vehicles with airbags and RTE units | AH91.00-P-0002-01M | ||
| Information, assessment and legal requirements when working with, handling and storing pyrotechnical components | AH91.00-Z-0000-10A | ||
| Remove/install | |||
| 1 | Disconnect battery ground line | AR54.10-P-0003GZ | |
| 2 | Check shear plates for hinge of engine hood for damage | In case of damage to the shear plates for hinge of engine hood ↓ replace shear plates for hinge of engine hood |
AR91.60-P-0910GQ |
| 3 | Remove covers (1) | ||
| 4 | Disconnect electrical connector (2) | ||
| 5 | Unscrew bolt (3) | *BA91.60-P-1002-02A | |
| 6 | Pull out engine hood lifter (4) and remove | ||
| 7 | Install in the reverse order | ||
| Check | |||
| 8 | Check impact absorber at front bumper for damage | Model 166 as of model year 2016 with code U60 (Active Bonnet (Pedestrian protection)) Model 292 with code U60 (Active Bonnet (Pedestrian protection)) If the engine hood lifter has deployed |
AR88.20-P-2000GQC |
| Model 292 with code U60 (Active Bonnet (Pedestrian protection)) Model 166 as of model year 2016 with code U60 (Active Bonnet (Pedestrian protection)) In case of damage to the impact absorber ↓ replace impact absorber |
AR88.20-P-2000GQ | ||
| Model 166.0 as of model year 2016 with code U60 (Active Bonnet (Pedestrian protection)) Model 292 with code U60 (Active Bonnet (Pedestrian protection)) except code 772 (AMG styling package - front spoiler, side skirts and rear apron) |
AR88.20-P-2050GQB | ||
| 9 | Connect diagnostic system and check supplemental restraint system (SRS) | ||
| AD00.00-P-2000-04A |
ENGINE HOOD LIFTER
| Number | Designation | Model 166 | Model 292 | |
|---|---|---|---|---|
| BA91.60-P-1002-02A | Screw/nut, hood lifter to body | Nm | 10 | 10 |