LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2018 >> GLS550 >> Repair and Diagnosis >> Restraints >> Seat Belts >> Seats, Bunks, Restraint Systems - 166 Chassis 3 Of 3 >> Testing & Repair >> Remove/Install Engine Hood Lifter - AR91.60-P-0900GQ

Remove/Install Engine Hood Lifter - AR91.60-P-0900GQ

Model 166, 292 

with code U60 (Active Bonnet (Pedestrian protection)) 

Fig 1: Engine Hood Lifter Components Location - Model 166 With Code U60
G14139576Courtesy of MERCEDES-BENZ USA
WARNING Risk of injury  caused by performing testing and repair work on engine hood lifter Store pyrotechnical engine hood lifters with deployment side to one side, do not expose to any temperatures in excess of 100°C. When working on this unit, disconnect the power supply. AS91.00-Z-0007-01A
Information on preventing damage to electronic components due to electrostatic discharge   AH54.00-P-0001-01A
Notes on performing repair, body work and welding on vehicles with airbags and RTE units   AH91.00-P-0002-01M
  Information, assessment and legal requirements when working with, handling and storing pyrotechnical components   AH91.00-Z-0000-10A
REMOVINGINSTALLING Remove/install     
1 Disconnect battery ground line   AR54.10-P-0003GZ
2 Check shear plates for hinge of engine hood for damage In case of damage to the shear plates for hinge of engine hood

replace shear plates for hinge of engine hood
AR91.60-P-0910GQ 
3 Remove covers (1)    
4 Disconnect electrical connector (2)    
5 Unscrew bolt (3) TORQUE SPECIFICATION Screw/nut, hood lifter to body *BA91.60-P-1002-02A 
6 Pull out engine hood lifter (4) and remove    
7 Install in the reverse order    
INSPECT Check     
8 Check impact absorber at front bumper for damage Model 166
as of model year 2016
with code U60 (Active Bonnet (Pedestrian protection))
Model 292
with code U60 (Active Bonnet (Pedestrian protection))
If the engine hood lifter has deployed
AR88.20-P-2000GQC
    Model 292
with code U60 (Active Bonnet (Pedestrian protection))
Model 166
as of model year 2016
with code U60 (Active Bonnet (Pedestrian protection))
In case of damage to the impact absorber

replace impact absorber
AR88.20-P-2000GQ
    Model 166.0
as of model year 2016
with code U60 (Active Bonnet (Pedestrian protection))
Model 292
with code U60 (Active Bonnet (Pedestrian protection))
except code 772 (AMG styling package - front spoiler, side skirts and rear apron)
AR88.20-P-2050GQB
9 Connect diagnostic system and check supplemental restraint system (SRS)    
REFER TO SELF-DIAGNOSTIC SYSTEMS     AD00.00-P-2000-04A
ENGINE HOOD LIFTER

Number Designation Model 166 Model 292
BA91.60-P-1002-02A Screw/nut, hood lifter to body Nm 10 10