Remove/Install Front Seat - AR91.10-P-1000RG
Model 190
| Risk of injury during testing and repair operations related to pyrotechnical components | Do not expose pyrotechnical component parts to temperatures above 100°C or 212°F. Disconnect current supply when working on such component parts. | AS91.00-Z-0008-01A | |
| Topical note | Information, assessment and legal requirements when working with, handling and storing pyrotechnical components | AH91.00-Z-0000-10A | |
| Topical note | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Remove/install | |||
| 1 | Remove belt end fitting | AR91.40-P-1030-02A | |
| 2 | Move front seat (1) forwards and remove rear screws/bolts (2) | *BA91.10-P-1001-01R | |
| 3 | Move front seat (1) backwards and remove front screws/bolts (2) | *BA91.10-P-1001-01R | |
| 4 | Disconnect battery ground line | AR54.10-P-0003RG | |
| 5 | Lift front seat (1) and disconnect electrical connectors (3) | ||
| 6 | Remove front seat (1) from vehicle | Carefully lift front seat (1) out of vehicle. Otherwise components in the vehicle interior may be damaged. |
|
| 7 | Install in the reverse order |
FRONT SEATS
| Number | Designation | Model 190 | |
|---|---|---|---|
| BA91.10-P-1001-01R | Bolt, seat to vehicle floor | Nm | 50 |