Detach/Attach Belt End Fitting - AR91.40-P-1030-02A

Model 172, 190, 231 

Model 205.0/1/2, 213, 253, 293 

Except Code 460 (Canada version) 

Except Code 494 (US version) 

Model 206, 254 

Except Code 460 (Canada version) 

Except Code 494 (US version) 

Except Code 51B (Rating, country group EURO-NCAP) 

Model 214 

Except Code 460 (Canada version) 

Except Code 494 (US version) 

Notes on safety-relevant components

AH00.00-Z-0019-01A

Remove 

1. Pull belt end fitting (1) upward (arrow A).

   Courtesy of MERCEDES-BENZ USA

2. Release belt end fitting (1) by minimally (approx. 2 mm) lifting spring (2) (arrow B1), press down (arrow B2) and remove.

   Courtesy of MERCEDES-BENZ USA

   Install 

3. Position belt end fitting (1) on screw/bolt (3) (arrow D) and pull upward (arrow A).

   Courtesy of MERCEDES-BENZ USA

4. Press belt end fitting (1) down (arrow B2).

   The spring (2) must make contact at bolt head of screw/bolt (3). Dimension "E" must be at least 1.7 mm.

5. Have engagement checked by 2nd person.

   Courtesy of MERCEDES-BENZ USA