LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2017 >> GLE43 AMG 4D Utility >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Electrical System - Body - 166 Chassis - 5 Of 8 >> Retrofitting & Conversion >> Retrofit Incar Hotspot - AZ82.80-P-0002GQA

Retrofit Incar Hotspot - AZ82.80-P-0002GQA

MODEL 166.0 (except 166.074) 

with CODE 386 (Convenience telephony) 

with CODE 512 (COMAND APS with DVD changer) 

without CODE 460 (Canada version) 

without CODE 494 (US version) 

without CODE 498 (Japanese version) 

without CODE 830 (China version) 

MODEL 166.0 (except 166.074) 

with CODE 386 (Convenience telephony) 

with CODE 527 (COMAND APS with single DVD drive (with navigation)) 

without CODE 460 (Canada version) 

without CODE 494 (US version) 

without CODE 498 (Japanese version) 

without CODE 830 (China version) 

MODIFICATION NOTES

20.11.2012 Part order information revised    
G12081976
REMOVING Remove     
NOTES Information on preventing damage to electronic components due to electrostatic discharge   AH54.00-P-0001-01A
1 Switch off ignition and remove transmitter key or KEYLESS-GO start/stop button from electronic ignition lock control unit IMPORTANT KEYLESS-GO start/stop button only on vehicles with CODE 889 (Keyless-Go).  
2
REFER TO TESTING & REPAIR
REFER TO TESTING & REPAIR
Remove left and right rear seat armrest 60% rear seat backrest
40% rear seat backrest
AR91.12-P-1620GQ
AR91.12-P-1620GQA
3
REFER TO TESTING & REPAIR
Remove side paneling in left trunk   AR68.30-P-4800GQ
4
REFER TO TESTING & REPAIR
Remove D-pillar paneling on left MODEL 166.0 with CODE 228 (Stationary heater) AR68.30-P-4495GQ
5
REFER TO TESTING & REPAIR
Remove left and right rear door sills   AR68.30-P-4100GQ
6 Fold forward floor covering under rear seat cushion    
INSTALLING Install     
7 Retrofit InCar Hotspot (1) with holder   AZ82.80-P-0002-02GQA 
8 Install wiring harness into InCar Hotspot MODEL 166.0 with CODE 228 (Stationary heater)
MODEL 166.0 except CODE 228 (Stationary heater)
AZ82.80-P-0002-01GQB 
AZ82.80-P-0002-01GQA 
9 Fold back floor covering under rear seat cushion    
10 Mount cutout for floor covering for InCar Hotspot (1)   AZ82.80-P-0002-04GQA 
11 Install remaining parts    
12 Perform function test of InCar Hotspot (1) IMPORTANT See operator's manual for InCar Hotspot (1).  
13 Document retrofitted equipment via vehicle documentation (VeDoc) HI Attach "InCar Hotspot retrofitted in accordance with AZ82.80-P-0002GQA" under field organization texts for design group 82.  
PARTS ORDERING NOTE

Part no. Designation Quantity
KG98 Electrical system and function 1