Remove/install pressure and temperature sensor - AR07.04-P-0091GW
ENGINES 157 in MODEL 463
| Remove/install | |||
| Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel and risk of injury to eyes and skin caused by contact with fuel | No fire, sparks, open flames or smoking. Only pour fuels into suitable and appropriately marked containers. Wear protective clothing when handling fuel. |
AS47.00-Z-0001-01A | |
| 1 | Switch off ignition | ||
| 2 | Open engine hood | AR88.40-P-1000GG | |
| 3 | Detach ground line from battery | AR54.10-P-0003GW | |
| Notes on battery | AH54.10-P-0001-01A | ||
| 4 | Remove right air filter housing | AR09.10-P-1150GW | |
| 5 | Remove insulation on right rail (1) | ||
| 6 | Remove cable tie, release and disconnect electrical connection (2) | ||
| Clean | |||
| 7 | Clean rail (1) in the area around the pressure and temperature sensor (B4/25) | Cleaner from package | *BR00.45-Z-1028-04A |
| 8 | Unscrew pressure and temperature sensor (B4/25) from rail (1) | ||
| *BA07.52-P-1002-01G | |||
| 9 | Install in the reverse order | ||
| 10 | Read out and erase the fault memory using Star Diagnosis |
AD00.00-P-2000-04A | |
| Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. |
AS00.00-Z-0005-01A | |
| 11 | Check fuel system for leaks with engine running |
FUEL DISTRIBUTOR
| Number | Designation | Engine 157 | |
|---|---|---|---|
| BA07.52-P-1002-01G | Pressure and temperature sensor on fuel distributor | Nm | 33 |
REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1028-04A | Cleaner from package | Adolf Wurth GmbH & Co. KG |