Remove/Install Passenger Compartment Floor Covering - AR68.20-P-2045GW

Model 463 

as of model year 2013 up to model year 2019 

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove seat and console	Model 463 (except 463.202) as of model year 2013 up to model year 2019	AR91.10-P-3300GW
2	Remove air duct (6)	Air duct (6) is only clipped.
3	Unscrew nut (5) and remove ground line
4	Remove accelerator pedal	Model 463 as of model year 2013 up to model year 2019	AR30.12-P-1321GW
5	Remove door sill moldings	Model 463 as of model year 2013 up to model year 2019	AR68.30-P-4100GW
6	Remove front floor covering (1)
7	Remove tunnel floor covering (2)
8	Remove screws (7) and release tunnel trim (3)	When removing the center floor covering (4)
9	Remove center floor covering (4)	When removing from the left side, the center floor covering (4) is fastened with two threaded pins of the parking brake mounting console (arrows).
10	Install in the reverse order