Remove/Install Accelerator Pedal - AR30.12-P-1321GW
Model 463
As Of Model Year 2013 Up To Model Year 2019
Fig 1: Accelerator Pedal Components Location - Model 463 As Of Model Year 2013 Up To Model Year 2019
| Remove/install | |||
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| 1 | Switch off ignition | ||
| 2 | Remove cover below left of instrument panel | Model 463.234/242/272/273/348 as of model year 2013 up to model year 2019 | AR68.10-P-1500GW |
| 3 | Remove dust cap (1) | ||
| 4 | Unscrew nut (2) | ||
| 5 | Unhook accelerator pedal sensor (B37) | ||
| 6 | Disconnect electrical connection from accelerator pedal sensor (B37) | ||
| 7 | Install in the reverse order |