Remove/Install Panoramic Sliding Roof Frame - AR77.21-P-0801LWE
Model 213
with code 413 (Automatic panoramic sliding sunroof)
MODIFICATION NOTES
| 20.06.2018 | Conditions for re-installation of removed panoramic sliding sunroof frame deleted. | Operation steps 9, 10 |
| Risk of injury due to snapping or warming up of cutting wire and due to splinters when cutting out glued panoramic roofs | Wear cut-proof gloves and safety glasses. | AS77.21-Z-0002-01A | |
| Risk of injury caused by slipping when clamping blade in the multicutter and by splinters when cutting out bonded components | Wear cut-proof gloves and safety glasses. Always interrupt air or current supply when changing the cutting blade. | AS58.00-Z-0001-01A | |
| Notes on removal/installation of bonded elements of panoramic roof | AH77.21-P-0001-01A | ||
| Remove | |||
| 1 | Fully open roller sunblind of panoramic sliding sunroof. | ||
| 2 | Remove front fixed element of panoramic sliding sunroof. | AR77.21-P-0803LWE | |
| 3 | Remove rear fixed element of panoramic sliding sunroof. | AR77.21-P-0802LWE | |
| 4 | Remove movable glass section of panoramic roof. | AR77.21-P-0503LWE | |
| 5 | Remove roller sunblind motor of panoramic sliding sunroof. | AR77.21-P-0490LWE | |
| 6 | Remove panoramic sliding sunroof control module. | AR77.21-P-0002LWE | |
| 7 | Mask off adjacent paint surfaces with fabric tape. | ||
| 8 | Remove panoramic sliding sunroof frame. | AR77.21-P-0801-01LWE | |
| Fig 1 | |||
| Fig 3 | |||
| Fig 2 | |||
| Fig 5 | |||
| Install | |||
| 9 | Mount panoramic sliding sunroof frame on body and align. | ||
| 10 | Install front fixed element of panoramic sliding sunroof. | AR77.21-P-0803LWE | |
| 11 | Prepare panoramic sliding sunroof frame for installation. | Before starting work, all components, materials and tools must be prepared for installing the front panoramic sliding roof frame. Otherwise it may not be possible to maintain permissible processing and joining times. |
AR77.21-P-0801-02LWE |
| 12 | Prepare body flange. | AR77.21-P-0801-03LWE | |
| 13 | Apply adhesive material for panoramic sliding sunroof frame. | AR77.21-P-0801-04LWE | |
| 000 588 00 72 00 Sealing and corrosion protection gun | WS97.00-P-0001B | ||
| Fig 4 | |||
| 14 | With aid of helper, mount panoramic sliding sunroof frame on body and align. | AR77.21-P-0801-05LWE | |
| Fig 2 | |||
| 15 | Remove textile adhesive tape. | ||
| Check | |||
| 16 | Before initially driving the vehicle, check strength of adhesively bonded connection by means of the produced reference adhesive bead. | The vehicle may not be moved for at least 10 h after the gluing in of the panoramic sliding sunroof frame. Otherwise the strength of the adhesive connection can be impaired and proper adhesion of the adhesive material is not ensured. |
|
| 17 | Once the adhesively bonded connection has fully cured, remove weights for weighting down panoramic sliding sunroof frame. | Do not remove weights before reference adhesive bead is completely cured. Otherwise the strength of the adhesive connection can be impaired and proper adhesion of the adhesive material is not ensured. |
|
| 18 | Install panoramic sliding sunroof control module. | AR77.21-P-0002LWE | |
| 19 | Install roller sunblind motor of panoramic sliding sunroof. | AR77.21-P-0490LWE | |
| 20 | Install movable glass section of panoramic roof. | AR77.21-P-0503LWE | |
| 21 | Install rear fixed element of panoramic sliding sunroof. | AR77.21-P-0802LWE | |
| 22 | Normalize panoramic sliding sunroof using vehicle diagnosis system and perform teach-in run for automatic reversing function. | ||
| AD00.00-P-2000-04B |