Remove/install bracket for compressor - AR32.22-P-2009LW

MODEL 205 with CODE 489 (AIRMATIC) 

Fig 1: Compressor Bracket Remove/Install Components (1 Of 2)

Courtesy of MERCEDES-BENZ USA

Fig 2: Compressor Bracket Remove/Install Components (2 Of 2)

Courtesy of MERCEDES-BENZ USA

	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
	Remove/install
1	Remove AIRmatic compressor (A9/1)		AR32.22-P-2001LW
2	Open line bracket (2) and unhook air intake duct (3)
3	Open line bracket (4) and unhook lines
4	Detach AIRmatic valve unit from bracket (1) and place to one side with lines still connected		AR32.22-P-2015LW
5	Remove bolt (5)	Bolt/nut, bracket for compressor unit to body	*BA32.22-P-1002-03G
6	Unscrew nut (6)	Bolt/nut, bracket for compressor unit to body	*BA32.22-P-1002-03G
7	Slacken nut (7)	Nut (7) does not have to be fully unscrewed.
		Bolt/nut, bracket for compressor unit to body	*BA32.22-P-1002-03G
8	Slide bracket (1) backwards and remove
9	Check elastomer bearing (8)	Check elastomer bearing (8) for hardening and damage, and replace if necessary.
10	Remove elastomer bearing (8) and line bracket (2, 4)	When replacing bracket (1).
11	Install in the reverse order

AIR SUSPENSION

Number	Designation		MODEL 205
BA32.22-P-1002-03G	Bolt/nut, bracket for compressor unit to body	Nm	17