Remove/install rear seat backrest side bolster - AR91.12-P-1710LW

Model 205.0/1 with code 287 (Folding rear seat backrests) 

Model 205.2 

Model 205.3 

Shown on MODEL 205.0 with CODE 287 (Foldable rear seat backrests) 

Fig 1: Rear Seat Backrest Side Bolster Remove/Install Components - Shown On Model 205.0

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove seat cushion in the rear	Model 205.0/1 with code 248 (Rear seat with integrated child seat) with code 287 (Folding rear seat backrests) Model 205.0 with code 287 (Folding rear seat backrests) with code P10 (Taxi package Germany) Model 205.2 with code 248 (Rear seat with integrated child seat) Model 205.2 with code P10 (Taxi package Germany)	AR91.12-P-1020LWA
		Model 205.0/1 with code 287 (Folding rear seat backrests) except code 248 (Rear seat with integrated child seat) except code P10 (Taxi package Germany) Model 205.2/3 except code 248 (Rear seat with integrated child seat) except code P10 (Taxi package Germany)	AR91.12-P-1020LW
2	Hang seat belt (1) as shown to one side
3	Unscrew bolt (3)
4	Lift side bolster (2) in direction of arrow and remove upwards	Ensure correct seating of side bolster (2). Model 205.0/1 with code 287 (Folding rear seat backrests) Installation:  First hook wire hoop (4) into mount.
5	Install in the reverse order