Check And Correct The Adjustment Of The Headlamps - AP82.10-D-8260B
MODEL 906 with CODE (LG0) Bi-xenon headlamps with CODE (LG1) Bi-xenon headlamps with cornering illumination
| Check | |||
| Risk of death
caused by high voltage levels present at xenon headlamps. Risk of explosion/fire hazard due to highly flammable substances in area of damaged xenon bulbs Risk of injury due to UV light, hot components on xenon headlamps and glass splinters when xenon bulbs burst Risk of poisoning caused by inhalation of mercury vapors and by toxic salts and mercury compounds being ingested or coming into contact with skin |
Do not come into contact with parts that are under high voltage. Persons with active electronic implants (e.g. heart pacemakers) must never work on xenon headlamps. Switch off entire lighting system. Wear insulated safety shoes, safety glasses and protective gloves. Remove highly inflammable materials from the hazard area. Ensure sufficient ventilation in the working area. | AS82.10-Z-0001-01A | |
| 1 | Check and correct tire inflation pressure | ||
| 2 | Park vehicle on a level surface. | On model 639 with code (CLO) Rear lowerable/raisable air suspension, not in passive position. |
|
| 3 | Align headlamp aimer with vehicle and perform height adjustment toward center of lens | Headlamp aimer - mobile |
|
| 4 | Switch on low beam | ||
| 5 | Check function of headlamp range adjustment through placement of additional weights in the luggage compartment | ||
| 6 | Remove additional weights from luggage compartment | ||
| 7 | Check low beam setting and correct if necessary | AP82.10-P-8260-01A | |
| 8 | Check setting of high beam | AP82.10-P-8260-02A | |
| 9 | Check setting of front fog lamps and correct if necessary | Model 906 with code (L16) Halogen front fog lamps, Model 636, 639 |
AP82.10-D-8260-04B |
| 10 | Disconnect STAR DIAGNOSIS | ||
| 11 | Switch off low beam. |