Set Low Beam - AP82.10-P-8260-01A
| AP82.10-P-8260-01A | Set low beam | ||
| Risk of death due to high voltage in xenon headlamps. Risk of explosion/risk of fire caused by highly flammable materials in the vicinity of damaged xenon bulbs. Risk of injury caused by UV light, hot components at xenon headlamps and glass splinters produced by bursting xenon bulbs. Risk of poisoning caused by inhalation of mercury vapors and by toxic salts and mercury compounds being ingested or coming into contact with skin | Do not touch parts conducting high voltage. Persons with active electronic implants (e.g. cardiac pacemakers) must never work on xenon headlamps. Switch off the entire lighting system. Wear insulated safety shoes, safety glasses and protective gloves. Remove highly inflammable materials from the hazard area. Ensure sufficient ventilation in the working area. | AS82.10-Z-0001-01A |
MODEL 906 with CODE LG0 (Bi-xenon headlamps) with CODE LG1 (Bi-xenon headlamp with corner-illuminating fog lamps)
Check adjustment of low beam headlamps.
When setting the height, the light-dark boundary must have the same coverage as the horizontal broken line (4) of the device. For the side adjustment the kinked line (5) must be under the central mark (6) start at the horizontal separating line (4).