Check And Correct The Adjustment Of The Headlamps - AP82.10-D-8260A

MODEL 906 except CODE (LG0) Bi-xenon headlamps except CODE (LG1) Bi-xenon headlamps with cornering illumination 

Courtesy of MERCEDES-BENZ USA

Courtesy of MERCEDES-BENZ USA

	Checking
1	Drive vehicle to level surface	Vehicle must be in curb condition (curb weight, full fuel tank or corresponding additional weight). Driver seat loaded with 75 kg.
2	Check and correct tire inflation pressure
3	Align and adjust headlamp aimer as per the operating instructions	The reflector is aligned by turning the horizontal adjusting device (1) or vertical adjusting device (2). Headlamp aimer - mobile
4	Place headlamp range adjustment switch on position 0
5	Open engine hood
6	Check low beam setting and correct if necessary		AP82.10-P-8260-01A
7	Check setting of high beam		AP82.10-P-8260-02A
8	Check setting of front fog lamps and correct if necessary	Model 906 with code (L16) Halogen front fog lamps,	AP82.10-D-8260-04B