LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2012 >> CL63 >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Electrical System - Body - 216 Chassis - 2 Of 9 >> Basic Knowledge >> Mobile phone system, function >> Mobile phone system, function - GF82.70-P-0007LE

Mobile phone system, function - GF82.70-P-0007LE

MODEL 216 except CODE (498) Japan version as of model year 2010/YoM 09 

MODEL 221 except CODE (498) Japan version as of model year 2010/YoM 09 model refinement package 

MODEL 216, 221 up to 31.5.09 with CODE (389) Mobile phone preinstallation with universal interface, USA/Canada with CODE (386) Preinstallation for telephone "Cell phone", UPCI [UHI] system 

Function requirements for mobile phone system, general 

Mobile telephone system, general 

A differentiation is made between the following variants for the mobile phone system:

For comfort telephony the telephone signals are sent over the telephone antenna (A2/49a1) to the mobile telephone network.

The mobile phone system without code (379) Telephone module with Bluetooth SAP is made up of the following subfunctions :

The following subfunctions and additional information:

Mobile phone system with code (379) Telephone module with Bluetooth SAP 

A Bluetooth® mobile telephone adapter is plugged onto the Bluetooth module (with code 386) Comfort telephony).

IMPORTANT The Bluetooth® mobile telephone adapter supports the SIM Access Profile (SAP).

Operation and system behavior match the mobile phone system with code (386) Comfort telephony, with the exception of the following special features:

Authorize 

The Bluetooth® mobile telephone adapter is connected using the "Connect SAP module" entry in the "Telephone" menu to the COMAND controller unit (A40/3) (authorized).

Proceed as follows for authorization:

IMPORTANT If a SIM card is not plugged in to the Bluetooth® mobile telephone adapter, the Bluetooth® mobile telephone adapter can use a SIM card of a Bluetooth-compatible mobile phone in the vehicle, if the mobile phone supports the SIM Access Profile.

As soon as Bluetooth® mobile telephone adapter is connected to the COMAND controller unit, the "Connect SAP module" menu entry is replaced by "Disconnect SAP module".

"SAP telephones" menu entry 

The "SAP telephones" menu entry leads to a list of devices which matches the list for Bluetooth® telephony. Special features of the SAP module unit list are the "Save PIN" and "Ring tones" functions under "Options". In "Ring tones", one of eight ring tones can be selected on the Bluetooth® mobile telephone adapter for the telephony via the Bluetooth® mobile telephone adapter.

signal curve 

The Bluetooth® mobile telephone adapter communicates directly over the Bluetooth antenna (A2/91) to the COMAND controller unit.

IMPORTANT The Bluetooth module is used by the Bluetooth® mobile telephone adapter for the power supply and for connection to the telephone antenna only.

The Bluetooth® mobile telephone adapter sends the telephone signals over the following channel to the mobile telephone network:

IMPORTANT On model 216 the radio signal for the stationary heater is received by the separate stationary heater antenna (Telestart) (A2/27).

Address book 

The address book contains the address entries stored in the COMAND controller unit. The user can manage all the contact data in the address book (view, edit, add, delete and create). The data from the telephone book of the mobile phone can also be imported into the address book of the COMAND controller unit.

The data from the mobile phone's telephone book are therefore also available, even if the mobile phone is no longer inserted in UPCI [UHI] cell phone holder. Address entries can only be removed by deleting individual entries or by deleting the entire address book. The Bluetooth interface of the mobile phone and the Bluetooth antenna can also be used to transmit data from other external devices (e.g. PDA, laptop) into the address book. These data are then permanently available as address entries.

As of 1.6.09: The call lists are automatically loaded to the temporary memory via the Phonebook Access Profile (PBAP) transfer protocol.

The address book is automatically copied to the COMAND controller unit in the background and is stored for this mobile phone. This address book can only be called up if it matches the assigned mobile phone.

When a mobile phone is reconnected, the corresponding address book is displayed. Synchronization with the mobile phone takes place again in the background and the address book is updated. The address-relevant applications for telephony can be started directly via the address book entries and provided with the data stored. The address book is called up through the basic "Tel" function as follows:

Address entries can contain the following:

REFER TO SYSTEM WIRING DIAGRAMS Electrical function schematic for cellular phone Model 216
With code (379) Telephone module with Bluetooth SAP		 PE82.70-P-2051-97CAD
Model 221
With code (379) Telephone module with Bluetooth SAP		 PE82.70-P-2051-97SAD
  Mobile phone system, location of components Model 216 GF82.70-P-0007-01LA 
Model 221 GF82.70-P-0007-01LE
  Mobile phone system, block diagram Model 216 GF82.70-P-0007-02LA 
Model 221 GF82.70-P-0007-02LE
  Mobile phone system, operating instructions   GF82.70-P-0007-07LE 
  Telephone switch-on/switch-off characteristics, function   GF82.70-P-2007LE 
  Setting up/ending phone call, function   GF82.70-P-2008LE 
  Short Message Service (SMS), function Up to 31.5.09 with code (389) Mobile phone preinstallation with universal interface, USA/Canada or code (386) Preinstallation for telephone "cell phone", UPCI [UHI] system As of 1.6.09 with code (386) Comfort telephony GF82.70-P-2014LE 
  Voice control, function Up to 31.5.09 with code (813) Voice control system (VCS [SBS])
As of 1.6.09		 GF82.70-P-3020LE 
scientia non olet · About LEMON Manuals