Setting up/ending phone call, function - GF82.70-P-2008SX
MODEL 221.0/1 with CODE (494) USA version up to Model Year 8
MODEL 221.0/1 with CODE (387) Preinstallation for telephone "Handy", UPCI system, USA/Canada up to Model Year 8
MODEL 221.0/1 with CODE (389) Mobile phone preinstallation with universal interface, USA/Canada up to Model Year 8
MODEL 221.0/1 with CODE (386) Preinstallation for telephone "Handy", UPCI system up to Model Year 8
MODEL 221.0/1 with CODE (388) Telephone "Handy", UPCI system up to Model Year 8
MODEL 216.3 with CODE (494) USA version up to Model Year 8
MODEL 216.3 with CODE (386) Preinstallation for telephone "Handy", UPCI system up to Model Year 8
MODEL 216.3 with CODE (388) Telephone "Handy", UPCI system up to Model Year 8
Function requirements:
- Voltage supply o.k.
- Media Oriented System Transport (MOST) active
- Portable CTEL (A34/6) placed in UPCI (Universal Portable CTEL Interface) (A34/15) holder
- Subscriber Identification Module (SIM) card inserted in portable CTEL
- Correct Personal Identification Number (PIN) entry and successful login into the relevant mobile telephone network of the service provider
Establishing a call
With the portal CTEL keypad
After entering the desired telephone number or selecting a stored entry from the phone book and then pressing the "Accept phone call" button on the portable CTEL, the call is set up. Hands-free mode is active.
Using the center console button group (S148)
The telephone menu in the COMAND controller unit (A40/3) must be activated. The entered number is dialed by pressing the "Send" button.
With the left multifunction steering wheel button group (S110) and the right multifunction steering wheel button group (S111)
The telephone book (menu item "TEL") of the portable CTEL is selected by pressing the system selection button (S110s3) via the selection menu of the multifunction display (A1p13) in the instrument cluster (A1). The name of the person to be called is selected by scrolling forward and back in the telephone book (menu item "TEL") of the portable CTEL using the scroll forward/back (S110s1) button. The call is activated using the accept/terminate phone call button (S111s3).
Via voice control, with code (813) Voice control system (VCS [SBS]) or with code (396) Linguatronic - English (US)
If the VCS on button (S111s4) is pressed, the call can be set up by voice command using the voice control system (VCS). Once the VCS [SBS] has been activated, a beep is emitted to indicate that a voice command is required.
The following voice commands exist for vehicles with code (813) Voice control system (VCS [SBS]):
- "Help" or "Help telephone"
- "Enter PIN"
- "Dial number"
- "Select name"
- "Redial"
- "Save name"
- "Read telephone book"
- "Delete telephone book"
- "Delete name"
For vehicles with code (396) Linguatronic - English (US), the listed voice commands apply correspondingly.
Via the front central operating unit (A40/9)
The telephone function of the so-called man-machine interface (MMI) is selected via the "TEL" menu item or via the telephone/navigation quick select button (A40/9s5).
The telephone number is then entered using the turn/push control (A40/9s11). It is possible to search via the menu entry "Name" in the address book or via the menu entry "Call lists" in the call lists (missed, answered, dialed). The call is activated using the "SEND" function. The stored telephone numbers are located either on the SIM card or in the telephone's own memory.
Phone calls can be made in "private mode" using a Bluetooth headset.
If an audio source is active at the beginning of a call, the audio source is muted. This is indicated in the display of the portable CTEL, in the COMAND display (A40/8) and in the multifunction display of the instrument cluster.
Terminating a call
The user has several ways of terminating the call:
- Pressing the "Terminate call" button on the portable CTEL
- Pressing the accept/terminate phone call button in the right multifunction steering wheel button group on the multifunction steering wheel (MFL)
- Pressing the "Terminate phone call" button on the center console button group
- By voice input, with code (813) Voice control system (VCS [SBS]) or with code (396) Linguatronic - English (US), via specific commands, or by pressing the "Back" and VCS [SBS] off button (S110s4) in the left multifunction steering wheel button group on the MFL
- By pressing the turn/push control of the front central operating unit
| Hands-free system microphone, component description | Model 221.0/1 with code (387) Preinstallation for telephone "Handy", UPCI system, USA/Canada Model 221.0/1 up to 31.8.06 with code (386) Preinstallation for portable CTEL UPCI [UHI] system with code (388) Universal Portable CTEL Interface System with CODE (494) USA version |
GF82.70-P-4121SX |
| Model 221.0/1 with code (389) Mobile phone preinstallation with universal interface, USA/Canada Model 221.0/1 as of 1.9.06 with code (386) Preinstallation for portable CTEL UPCI [UHI] system with code (388) Universal Portable CTEL Interface System with CODE (494) USA version Model 216.3 with code (386) Preinstallation for portable CTEL UPCI [UHI] system with code (388) Universal Portable CTEL Interface System with CODE (494) USA version |
GF82.70-P-4121SXX | |
| Center console button group component description | GF82.70-P-4131SX | |
| UPCI portable CTEL holder (Universal Portable CTEL Interface), component description | GF82.70-P-5001SX | |
| Universal Portable CTEL Interface (UPCI [UHI]) control unit, component description | GF82.70-P-5101SX |