Wiring diagram for tire pressure monitor control unit - PE40.15-P-2101MAC
MODEL 164.1 as of Model Year 2010/CY 09 CORA standard/premium, control unit N88
MODEL 164.8 as of Model Year 2010/CY 09 model refinement package CORA standard/premium, control unit N88
| Wiring diagram for tire pressure monitor control unit | PE40.15-P-2101-97MAC | ||
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Use of wiring diagrams | OV00.01-P-1901-03MAA | ||
| Search aid for all wiring diagram groups | Model 164 circuit diagrams |
OV00.01-P-1901MAA | |
| Search aid for all wiring diagram groups | Model 164 function group 07 - 15, function schematics |
OV00.01-P-1901MAB | |
| Search aid for all wiring diagram groups | Model 164 function group 27 - 80, function schematics |
OV00.01-P-1901MAC | |
| Search aid for all wiring diagram groups | Model 164 function group 82, function schematics |
OV00.01-P-1901MAD | |
| Search aid for all wiring diagram groups | Model 164 function group 83 - 91, function schematics |
OV00.01-P-1901MAE | |
| Abbreviations for wiring diagrams | OV00.01-P-1001-27A | ||
| Abbreviations of signal and circuit designations for wiring diagrams | OV00.01-P-1001-28MAA | ||
| Location and assignment of line and connectors | GF00.19-P-1000MAA | ||
| Location and assignment of ground points | GF00.19-P-2000MAA | ||
| Location and assignment of Z connector sleeves (line connectors in wiring harness) | GF00.19-P-3000MAA | ||
| Overview of wiring diagrams covering multiple function groups | Further wiring diagrams | PE00.19-P-1100MAA | |
| Overview of wiring diagrams for mixture formation | Further wiring diagrams | PE07.00-P-1100MAA | |
| Overview of wiring diagrams for electrical system, equipment and instruments | Further wiring diagrams | PE54.00-P-1100MAA | |
| Fuse and relay box, as-built configuration | MODEL 164.1 (except 164.195) as of model year 09/CY 08 model refinement package MODEL 164.8 as of model year 09/CY 08 |
GF54.15-P-0800GM | |
| Repair wiring harness as per specified repair method | The original wire color is visible again after the repaired wire section (length about30 cm). |
AR00.19-P-0001A |