Remove/install telescoping nozzle for headlamp cleaning system - AR82.15-P-6100R

MODEL 230.4 

Fig 1: Identifying Telescoping Nozzle For Headlamp Cleaning System Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
1.1	Remove left front section of fender liner together with left front engine compartment paneling or right front section of fender liner together with right front engine compartment paneling	When removing the left or right telescopic nozzle (1). The left or right front section of the fender liner remains bolted to the corresponding front engine compartment paneling and is removed as a unit. Refer to: ↓
		Remove/install inner fender in front fender	AR88.10-P-1300R
		Remove and install bottom engine compartment paneling	AR61.20-P-1105R
2.1	Detach front bumper	When removing the left or right telescopic nozzle (1).	AR88.20-P-2000-01R
2.2	Remove front bumper	When removing the left and right telescopic nozzle (1).	AR88.20-P-2000R
3	Detach retaining clamp (2) and remove washer fluid hose (3) from telescopic nozzle (1)	Collect washer fluid which flows out.
4	Undo screws (4, 5) from bracket (6) of telescopic nozzle (1)
5	Remove bracket (6)
6	Unscrew bolt (7)
7	Remove telescopic nozzle (1) upward	Guide out telescopic nozzle (1) using a rotary motion.
8	Install in the reverse order
9	Fill washer fluid reservoir
	Windshield washer system - inspect fluid level, adjust to correct level		AP82.35-P-8210N