Testing and repair work: Passenger cars: Mixture formation - AR07.00-Z-9272AB
WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 2012 Mercedes-Benz GL550, 2012 Mercedes-Benz GL450, 2011 Mercedes-Benz ML63, 2011 Mercedes-Benz ML550, and 2011 Mercedes-Benz ML350. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 272
| Remove/install fuel distributor with injection valves (ME-SFI) | ENGINE 272, 273 in MODEL 164, 251 | AR07.03-P-1451GZA | |
| Remove/install injection valves (ME-SFI) | ENGINE 272, 273 in MODEL 164, 251 | AR07.03-P-6520GZA | |
| Remove/install hot film mass air flow sensor | ENGINE 272, 273 in MODEL 164, 251 | AR07.07-P-1453GZA | |
| Remove/install injection system control unit | ENGINE 272, 273 in MODEL 164, 251 | AR07.08-P-7008GZA | |
| Remove/install heated O2 sensor | ENGINE 272, 273 in MODEL 164, 251 | AR07.52-P-5303GZP | |
| Remove/install throttle valve actuator | ENGINE 272, 273 in MODEL 164, 251 | AR07.61-P-1401GZA |