Emission control, function - GF14.00-P-3000P
ENGINE 642.9 in MODEL 164.1 /8, 203.0 /2, 204.0 /2, 209.3 /4, 211.0 /2 /6, 219.3, 221.0 /1, 251.0 /1 except CODE (474)
Particulate filter
ENGINE 642.9 in MODEL 461.3 except CODE (474) Particulate filter
The exhaust gases output by the engine are cleaned by the exhaust system and by a near engine mounted primary catalytic converter and a catalytic converter (TWC). The catalytic convertor is also used to reduce noise pollution. The task of exhaust cleaning is to meet the exhaust emission limit values prescribed by the lawmaker through reducing the following pollutants in the exhaust:
- Nitrogen oxide (NOX )
- Hydrocarbons (HC)
- Carbon monoxide (CO)
- Particulate matter (particles) (PM)
In addition to emission control, exhaust gas recirculation (EGR) and intake port shutoff are used (except model 461). EGR reduces the NOX content and intake port shutoff reduces the PM levels in the emissions (except model 461).
| Component description for O2 sensor | Model 203, 209 G3/2 |
GF07.04-P-6100P | |
| Engine 642.920 in model 211.020/220/620, 219.322 Engine 642.921 in model 211.084/089/284/289 Engine 642.920 in model 211.022 except code (494) USA version Engine 642.920 in model 211.022/222 except code (498) Japan version G3/2 |
GF07.04-P-6100T | ||
| Model 164 G3/2 |
GF07.04-P-6100GZ | ||
| Model 221 G3/2 |
GF07.04-P-6100SX | ||
| Model 251 G3/2 |
GF07.04-P-6100RT | ||
| Model 461 G3/2 |
GF07.04-P-6100GX | ||
| Component description for an oxygen sensor | Type 204.0 G3/2 |
GF07.04-P-6101CO | |
| Component description for the catalytic converter temperature sensor | Model 203, 209 B19/7 |
GF07.04-P-6110P | |
| Engine 642.920 in model 211.020/220/620, 219.322 Engine 642.921 in model 211.084/089/284/289 Engine 642.920 in model 211.022 except code (494) USA version Engine 642.920 in model 211.022/222 except code (498) Japan version B19 |
GF07.04-P-6110T | ||
| Model 164 B19/7 |
GF07.04-P-6110GZ | ||
| Model 251 B19/7 |
GF07.04-P-6110RT | ||
| Model 461 B19/7 |
GF07.04-P-6110GX | ||
| Component description for the catalytic converter temperature sensor | Model 204.0 B19 |
GF07.04-P-6112CO | |
| Component description for CDI control unit | Model 203, 209 N3/9 |
GF07.16-P-6000P | |
| Model 211, 219 N3/9 |
GF07.16-P-6000T | ||
| Model 164 N3/9 |
GF07.16-P-6000GZ | ||
| Model 221 N3/9 |
GF07.16-P-6000SX | ||
| Model 251 N3/9 |
GF07.16-P-6000RT | ||
| Model 204.0 N3/9 |
GF07.16-P-6000CO | ||
| Model 461 N3/9 |
GF07.16-P-6000GX | ||
| Component description for the glow time output stage | Model 164.1/8, 203.0/2, 209.3/4, 211.0/2/6, 219.3, 221.0/1, 251.0/1 N14/3 |
GF15.20-P-4010P | |
| Model 461 N14/3 |
GF15.20-P-4010GX | ||
| Component description for glow output stage | Model 204.0 N14/3 |
GF15.20-P-2105CO | |
| Component description for glow plugs | Model 164.1/8, 203.0/2, 209.3/4, 221.0/1, 251.0/1, 461.3 Engine 642.920 in model 211.020/220/620, 219.322 Engine 642.921 in model 211.084/089/284/289 Engine 642.920 in model 211.022 except code (494) USA version Engine 642.920 in model 211.022/222 except code (498) Japan version R9 |
GF15.20-P-4020P | |
| Model 204.0 R9 |
GF15.20-P-4020CO | ||
| Component description for oxidation catalytic convertor | Model 203, 209 | GF49.10-P-3006P | |
| Engine 642.920 in model 211.020/220/222/620, 219.322 Engine 642.921 in model 211.084/089/284/289 Engine 642.920 in model 211.022 except code (494) USA version |
GF49.10-P-3006T | ||
| Model 164 | GF49.10-P-3006GZ | ||
| Model 221 | GF49.10-P-3006SX | ||
| Model 251 | GF49.10-P-3006RT | ||
| Model 204.0 | GF49.10-P-3006CO | ||
| Model 461 | GF49.10-P-3006GX | ||
| Component description for the exhaust system | Model 203, 209 | GF49.00-P-3010P | |
| Model 211, 219 | GF49.00-P-3010T | ||
| Model 164 | GF49.00-P-3010GZ | ||
| Model 251 | GF49.00-P-3010RT | ||
| Model 204.0 | GF49.00-P-3010CO | ||
| Model 461 | GF49.00-P-3010GX |