Rear Wall & Rear End
- Testing & Repair
- Testing and repair work: Passenger cars: Rear wall and rear end - AR64.00-Z-9216AA
- Remove/install rear shelf reinforcement - AR64.10-P-1200SX
- Cut off rear end center assembly - AR64.20-P-1000-02SX
- Prepare bottom rear center section for installation - AR64.20-P-1000-07SX
- Install and weld in bottom rear center section - AR64.20-P-1000-08SX
- Replace complete bottom rear center section - AR64.20-P-1000SX
- Separate rear center section with crossmember - AR64.20-P-1060-01SX
- Install crossmember and weld in - AR64.20-P-1060-03SX
- Replace bottom rear center section together with rear crossmember - AR64.20-P-1060SX
- Prepare rear crossmember for installation. - AR64.20-P-1100-02SX
- Torque Specifications
- Special Tools