Remove/install paneling on C-pillar - AR68.30-P-4490GZ

MODEL 164 

Shown on model 164.1 

Fig 1: Identifying Paneling Remove/Install Components On C-Pillar - Ar68Shown On Model 164

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Remove/install
1	Remove side paneling in trunk	Model 164.1	AR68.30-P-4800GZ
		Model 164.8	AR68.30-P-4800RT
2	Unclip cover and unscrew bolt (1) below.
3	Unscrew bolt (2)	In model 164.8 only one bolt.
4	Unscrew bolt (3) from belt end fitting at bottom.		*BA91.40-P-1001-01H
5	Unclip C-pillar side paneling (4), remove seat belt.	On model 164.1: Remove C-pillar side paneling (4) toward front and inside. Installation:  Do not twist seat belt.
		Mounting wedge	Figure
6	Install in the reverse order

SEAT BELTS/EMERGENCY TENSIONING RETRACTORS

Number	Designation		Models 164.1/8
BA91.40-P-1001-01H	Bolt to seat belt fitting	Nm	35

Fig 2: Identifying Mounting Wedge (110 589 03 59 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.