Remove/install side paneling in trunk - AR68.30-P-4800RT

MODEL 251, 164.8 

Shown on model 251.1 

Fig 1: Identifying Side Paneling - Shown On Model 251.1

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 2: Identifying Side Paneling Remove/Install Components In Trunk - Shown On Model 251.1 With Rear Air Conditioning

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Shown on model 251.1 with rear air conditioning, code 582 

Shown on model 251.1 

Fig 3: Locating Door Sill Molding And Clip - Shown On Model 251.1

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Remove/install
1.1	Remove load compartment cover	Only on vehicles with luggage compartment cover, code 723.
2	Open cover (2) and remove
3	Remove screw (3)
4	Unscrew bolt (4), remove luggage hook (5).
5	Remove door sill molding in load compartment	Model 164.8	AR68.30-P-4100GZA
		Model 251	AR68.30-P-4100RTA
6.1	Unscrew seat belt bolt on body in second seat row.	Only model 164.8.
			*BA91.40-P-1001-01H
7	Fold over seats in second and third seat row.
8	Remove door sill molding	Only on rear door.
		Model 164.8	AR68.30-P-4100GZ
		Model 251	AR68.30-P-4100RT
9	Unclip cover (6), unscrew bolt (7)	At front and rear on side paneling (1).
		Long wedge	Figure
10	Unclip side paneling (1) from clips (arrows A and B)	Model 164.8: Only two clips (arrows A) on front end of side paneling (1).
		Mounting wedge	Figure
11.1	Disconnect connector from 12 V socket	If present.
12.1	Disconnect connector on load compartment illumination	If present.
13.1	Disconnect connector on folding mechanism switch in 3rd seat row	Model 164.8, if present
14	Remove side paneling (1)
15	Install in the reverse order

Fig 4: Identifying Mounting Wedge (110 589 03 59 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 5: Identifying Long Wedge (115 589 03 59 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.