Suspension - 215 & 220 Chassis
- Diagnostic Trouble Code List
- Description & Operation
- General Information
- Basic Knowledge
- Suspension, general - GF32.00-P-9611C
- AIRmatic, function - GF32.22-P-0003A
- Contents, function description of AIRmatic - GF32.22-P-0998A
- AIRmatic level adjustment, function - GF32.22-P-4004C
- Level control, function - GF32.22-P-4005
- Pressure supply, function - GF32.22-P-4010
- Compressor unit, location / task / design / function - GF32.22-P-4101B
- AIRmatic control module with ADS position/task/function - GF32.22-P-4200B
- Pressure sensor, location / task / function - GF32.22-P-4500
- Central reservoir, location / task / design / function - GF32.22-P-4800A
- Survey of system components, AIRmatic, location / task / design / function - GF32.22-P-9999A
- Spring strut, location/task/design/function - GF32.25-P-1000
- Body acceleration sensor, location / task / function - GF32.31-P-4100A
- Comfort and SPORT switch, location/task/function - GF32.31-P-4200
- Damping valve, location / task / design / function - GF32.31-P-4300B
- Level sensor, location/task/design/function - GF32.31-P-4400
- Level control valve unit position/task/design/function - GF32.31-P-4500B
- Level adjustment switch, location/task/function - GF32.31-P-4600
- Adaptive damping system (ADS II), function - GF32.32-P-0001B
- Pressure sensor, location - GF32.33-P-3102
- Active body control (ABC) function - GF32.50-P-0001A
- Notes
- Active body control (ABC) driver information - GF32.50-P-0001-03A
- Active body control (ABC) driver information - GF32.50-P-0001-03B
- Active body control (ABC) location of hydraulic components - GF32.50-P-0001-06A
- Active body control (ABC) location of electrics/electronic components - GF32.50-P-0001-07A
- Active Body Control (ABC) function description contents - GF32.50-P-0999A
- Suspension/damping, function - GF32.50-P-2000A
- ABC level adjustment function - GF32.50-P-4004
- Suction restrictor valve, location/task/function - GF32.50-P-4100A
- Oil cooler, location/task/function - GF32.50-P-4110A
- Oil temperature sensor, location/task - GF32.50-P-4120A
- Valve unit, location/task/design/function - GF32.50-P-4200A
- Pressure supply valve unit, location/task/design - GF32.50-P-4210A
- Pressure reservoir, location/task/function - GF32.50-P-4220A
- ABC control module, location/task/function - GF32.50-P-4500A
- Plunger travel sensor location/task/design/function - GF32.50-P-4600A
- Longitudinal acceleration sensor location/task/function - GF32.50-P-4610A
- Lateral acceleration sensor location/task/function - GF32.50-P-4620A
- Oil reservoir location/task/design - GF32.50-P-4900A
- Overview of system components for Active Body Control (ABC) location/task/design/function - GF32.50-P-9999A
- Safety Precautions
- Trouble Diagnosis
- Air suspension strut leaky in area of adhesive - AF32.22-P-4040AU
- Display in instrument cluster indicates "Pneumatic suspension ... Visit workshop" (C1121, C1122, C1123, C1132, C1133)- AF32.32-P-2010A
- Battery discharges, vehicle can no longer be started - AF32.50-P-6400A
- Irregular level control after longer standing time (C1525, C1526, C1531)- AF32.50-P-6401A
- Vehicle does not lower and/or fault message on display "Air suspension, visit workshop", appears after longer trip on freeway (speed reduction) (C1517)- AF32.50-P-8100A
- Self-Diagnostic System
- Testing & Repair
- Remove/install limp-home buffers - AR32.00-P-1000I
- Testing and repair work: Passenger cars: Suspension - AR32.00-Z-9215AA
- Testing and repair work: Passenger cars: Suspension - AR32.00-Z-9220AA
- Clamping rear spring - AR32.20-P-0200-06MB
- Remove/install rear spring - AR32.20-P-0230MB
- Remove/install torsion/stabilizer bar on front axle - AR32.20-P-0300I
- Install new stabilizer bar pivot bushing - AR32.20-P-0310M
- Remove/install stabilizer bar on rear axle - AR32.20-P-0315
- Seal top air suspension strut - AR32.22-P-1600I
- Remove compressor, install - AR32.22-P-2001I
- Removing and installing AIRmatic central reservoir - AR32.22-P-2017I
- Remove/install air suspension control unit - AR32.22-P-6000I
- Inspecting AIRmatic for leaks - AR32.22-P-8100I
- Remove/install rear suspension strut - AR32.25-P-1016
- Remove/install the suspension assembly/strut - AR32.25-P-1017
- Replace rubber mounts of rear shock absorbers - AR32.25-P-1871M
- Removing and installing level control valve unit - AR32.31-P-0650I
- Remove/install front axle valve body - AR32.50-P-0001N
- Remove/install rear suspension valve body - AR32.50-P-0002N
- Valve body in pressurization circuit, removal and installation - AR32.50-P-0003N
- Remove/install hydraulic line (ABC) of tandem pump to pressure supply valve unit - AR32.50-P-0004M
- Remove/install hydraulic line - AR32.50-P-0005M
- Remove/install front suspension pressure reservoir - AR32.50-P-0010N
- Remove/install rear axle pressure reservoir - AR32.50-P-0011N
- Remove/install return pressure reservoir - AR32.50-P-0012N
- Remove/install pulsation damper - AR32.50-P-0013
- Remove/install pressure sensor for Active Body Control - AR32.50-P-0014N
- Remove/install oil cooler - AR32.50-P-0020N
- Fill up and vent the Active Body Control (ABC) system - AR32.50-P-0021N
- Remove/install control unit (ABC) Active Body Control - AR32.50-P-0023I
- High-pressure supply line with high-pressure expansion hose, removal and installation - AR32.50-P-1165-01A
- Maintenance
- Removal & Installation
- Torque Specifications
- Miscellaneous Notes