Removing and installing outer front door handle - AR72.10-P-2400P
MODEL 203
Illustrated on Model 203.0
Illustrated on Model 203.0
| Removing, installing | |||
| 1 | Remove door liner from front door | AR72.10-P-1000P | |
| 2 | Remove loudspeaker in front doors | Model 203.7 With code (810) sound system |
AR82.62-P-7845P |
| 3 | Remove side airbag | AR91.60-P-0690P | |
| 4 | Take off door foil | ||
| 5 | Unclip door sealing frame (9) in area of door lock | ||
| 6 | Slacken screw (5) in opening (10) and pull out door lock cylinder (3) | ||
| 7 | Detach coupling (11) | ||
| 8 | Take out door lock cylinder (3) | ||
| 9 | Pull handle (2) back and out of bearing arm (4), take off | ||
| 10 | Take off bases (6, 7) | ||
| 11 | Unscrew screw (8) | *BA72.10-P-1005-01A | |
| Figure | |||
| 12 | Take out bearing arm (4) through assembly opening of door | ||
| 13 | Install in the reverse order | ||
| 14 | Carry out operational check |
| Number | Designation | Model 203 | |
|---|---|---|---|
| BA72.10-P-1005-01A | Screw for front door handle | Nm | 3 |