 |
Risk of injury
caused by fingers being pinched or crushed
when removing, installing or aligning hoods, doors, trunk lids, tailgates or sliding roof. |
Keep body parts and limbs well clear of moving parts. |
AS00.00-Z-0011-01A |
| 1 |
Remove inner paneling from trunk lid |
Model 203.0 |
AR68.30-P-8150P |
| |
|
Model 209 |
AR68.30-P-8150Q |
| 2 |
Disconnect electric wiring harness, expose up to cable passage and remove |
|
|
| 3 |
Mark installation position of hinge lever (1) on trunk lid (2) |
|
|
| 4 |
Unscrew bolts (3) from hinge lever (1) on both sides |
 |
*BA88.50-P-1009-01A |
| 5 |
Remove trunk lid (2) out of hinge levers (1) upward |
Remove trunk lid (2) with aid of helper and lay down on suitable subbase |
|
| 6 |
Install in the reverse order |
|
|
| 7 |
Adjust trunk lid |
|
AR88.50-P-5200P |