Remove/install trunk lid paneling - AR68.30-P-8150P
MODEL 203.0
| Remove/Install | |||
|---|---|---|---|
| Risk of injury to fingers being jammed or pinched when removing and installing or aligning hoods, doors, trunk lid/tailgate or sliding roof. | When moving components, ensure that no body parts or limbs are within the operating range of moving parts. | AS00.00-Z-0011-01A | |
| 1 | Open trunk lid | ||
| 2 | Unlock hazard warning triangle (1) and remove. | ||
| 3 | Lift retaining clamp (2) with a suitable tool | ||
| 4 | Slide bracket (3) to the left and remove. | ||
| 5 | Remove bolts (4). | ||
| 6 | Unlock door lock paneling (5) and remove | ||
| 7 | Remove expanding clip (6) | ||
| 8 | Open retaining tabs and remove hinge lever cover (7) on both sides | ||
| 9 | Remove spreading clips (8) | ||
| 10 | Remove paneling at trunk lid (9) | ||
| 11 | Install in the reverse order |