Render emergency tensioning retractor units unusable - AR91.40-P-0611A

MODEL 163, 168, 170, 202, 203, 208, 209, 210, 215, 220, 230, 414, 463.200 /204 /206 /207 /208 /209 /220 /221 /224 /225 /227 /228 /230 /231 /232 /233 /240 /241 /243 /244 /245 /246 /247 /248 /249 /250 /254 /300 /303 /304 /307 /308 /309 /320 /321 /322 /323 /324 /325 /327 /328 /330 /331 /332 /333 /340 /341 

Figure item, etc.	Work instructions
	Risk of injury  caused by performing testing or repair work on airbag or emergency tensioning retractor units.	Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply. Except model 202 as of 1.7.93	AS91.00-Z-0001-01A
	Risk of injury  caused by performing testing or repair work on airbag or emergency tensioning retractor units.	Store airbag unit with deployment face up, do not subject to temperatures above 100 °C. When working on these units, disconnect power supply and unplug the SRS test connector (X11/13). With model 202 up to 30.6.93.	AS91.00-Z-0001-01B
	Ignition of removed emergency tensioning retractors		AR91.40-P-0611-02A
	Deployment of installed emergency tensioning retractor units	Only model 202 up to 30.6.93	AR91.40-P-0611-03A
	Operating the deployment device	Not valid for	AR91.60-P-0611-04A
	Deployment of emergency tensioning retractor units when no deployment device is present		AR91.40-P-0611-05A
	Check recognition of actuation state of emergency/compact tensioning retractor units	Only with model 170, 208, 210.0/6 as of 1.6.98, Model 203, 209, 215, 220, 230	AR91.40-P-0612A
	Important notes on disposal of airbag units, sidebag units and emergency tensioning retractor units	all	OS91.00-P-0001-01A