Removing, installing right engine support - AR22.10-P-4340AV

ENGINE 112.940 in MODEL 208.365

ENGINE 112.910 in MODEL 202.026 /086

ENGINE 112.920 in MODEL 202.029 /089

ENGINE 113.943 in MODEL 208.370 /470

ENGINE 113.944 in MODEL 202.033 /093

ENGINE 113.984 in MODEL 208.374

Shown on engine 112

Fig 1: Identifying Right Engine Support Remove/Install Components - Shown On Engine 112

	Removing, installing
1	Remove bottom engine compartment panel		AR61.20-P-1105AB
2.1	Remove engine mounts	All except model 208.370/374/470	AR22.10-P-1100AV
Model 208.370/374/470			AR22.10-P-1100MV
3	Unbolt engine support (1) at crankcase	Bolts (2) must only be used once
			*BA22.10-P-1005-01L
			Fig 2
4	Remove engine support (1)	Installation: Ensure no electric cables are jammed in between engine support and crankcase
5	Install in the reverse order

ENGINE MOUNTS, ENGINE SUPPORTS

Number	Designation			Engine 112.910/920, 113.944 in model 202.026/029/033/086/089/093	Engine 112.940, 113.943/984 in model 208.365/370/374/465/470
BA22.10-P-1005-01L	Bolt of engine support to crankcase	1st stage	Nm	20	20
BA22.10-P-1005-01L	Bolt of engine support to crankcase	2nd stage	∠ °	90	90

Fig 2: Identifying External Torx Set (001 589 76 09 00)