Removing and installing power window motor in rear door - AR72.29-P-1880F

MODEL 210 up to 28.2.97 

Fig 1: Identifying Power Window Motor In Rear Door Components

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Removal, installation
1	Remove door liner on rear door		AR72.12-P-1010F
2	Remove window lift mechanism in rear door	Only remove when upper screw (1) is concealed	AR72.12-P-1810F
3	Disconnect connector (M10/5x1, M10/6x1) from power window motor (M10/5, M10/6)
4	Unscrew Torx socket bolts		Figure
			Figure
			*BA72.29-P-1002-01A
5	Remove left or right rear power window motor (M10/5, M10/6) from window lift mechanism	Before installing grease gear on motor lightly
6	Reinstall in opposite order

Electric system side doors

Number	Designation		Model 210
BA72.29-P-1002-01A	Screw for rear power window motor	Nm	13

Fig 2: Identifying Torque Wrench (000 589 67 21 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 3: Identifying Torx Socket Bolt Set (000 589 01 10 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.