Removing and installing window lift in rear door - AR72.12-P-1810F

MODEL 210 

Fig 1: Identifying Window Lift In Rear Door Components

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Removal, installation
1	Remove door liner on rear door		AR72.12-P-1010F
2	Pull foil off of inner door panel	Before installing foil check window lift for easy motion
3	Unclip retainer (4) from window lift rail (5)
4	Extend crank operated window (6) toward rear out of slider (2) with window lift rail (5) and push upwards in window guide rail	Secure against falling with installation wedge	Figure
5	Drill out pop rivets (4 each)	To drill out: use 4.8 mm dia. bit
6	Unhook window lift from inner door panel with installation hook and remove through installation opening	On vehicles with power windows: disconnect connector
7	Reinstall in opposite order

Fig 2: Identifying Installation Wedge (110 589 03 59 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.