Central locking (CL), testing pneumatics - AD80.20-P-8001B

MODEL 202 as of 1.6.97, 208, 210.081 /281, 210 as of 1.3.97 

	Connection and use of test equipment			AD00.00-P-1000AZ
	Central locking (CL), diagnosis, advanced information			AD80.20-P-2001B
	Central locking (CL), pneumatics, location of components	Models 202.01/02/12/13 as of 06/97 Model 208 Model 210.081 Model 210.0 as of 03/97		GF80.20-P-0005-04D
		Models 202.07/08/18/19 as of 06/97 Model 210.281 Model 210.2 as of 03/97		GF80.20-P-0005-04E
	Testing
1	Complete system, driver's door, testing pneumatics, CL	Pressure range Expose PSE control module (combined) (A37) and disconnect pneumatic line for central locking, on driver's door connection on pneumatic system equipment. Connect tester with plug 202 805 04 44 at socket where pneumatic line was disconnected.		AD80.20-P-8001-01BA
		Parts for the test
		Plug	202 805 04 44
		Rubber hose, 50 mm	007 997 61 82
		Pneumatic line, 1 m	000 158 14 35
2	Complete system, driver's door, testing pneumatics, CL	Vacuum range Expose PSE control module (combined) (A37) and disconnect pneumatic line for central locking, on driver's door connection on pneumatic system equipment. Connect tester with plug 202 805 04 44 at socket where pneumatic line was disconnected.		AD80.20-P-8001-01BB
		Parts for the test
		Plug	202 805 04 44
		Rubber hose, 50 mm	007 997 61 82
		Pneumatic line, 1 m	000 158 14 35
3	Complete system, front passenger's door/rear doors/trunk lid, testing pneumatics, CL	Pressure range Expose PSE control module (combined) (A37) and disconnect pneumatic line for central locking, on front passenger's door or front passenger's door/rear connection on pneumatic system equipment. Connect tester with plug 202 805 04 44 at socket where pneumatic line was disconnected.		AD80.20-P-8001-02BA
		Parts for the test
		Plug	202 805 04 44
		Rubber	hose, 50 mm 007 997 61 82
		Pneumatic line, 1 m	000 158 14 35