Direction indicator/hazard flasher signal devices diagnosis, advanced information - AD82.25-P-2000A
MODEL 202 as of 1.6.97, 208, 210.081 /281, 210 as of 1.3.97
| To avoid damage to the control modules, couplings should only be disconnected or connected at the control modules with the ignition switched off. Fused cables are to be used if contacts are bridged during a test. | |||
| Battery voltage 11-14 V | |||
| Fuses in order | |||
| Corresponding bulbs in order | |||
| Connection and use of test equipment | AD00.00-P-1000AZ | ||
| Explanation of diagnosis symbols | AD00.00-P-2001A | ||
| Diagnosis assignment | AD00.00-P-2002A | ||
| Connection of diagnostic test equipment | AD00.00-P-2003A | ||
| Direction indicator/hazard flasher signal devices diagnosis tools | AD82.25-P-2000-01A | ||
| Notes on HHT advanced information diagnosis, direction indicator/hazard flasher signal devices | AD82.25-P-2000-02A | ||
| Function of direction indicator/hazard flasher | GF82.25-P-0002A | ||
| Contents, function description of direction indicator/hazard flasher | GF82.25-P-0998ZZ | ||
| Direction indicator/hazard flasher, location of components | GF82.25-P-0002-01A | ||
| Direction indicator/hazard flasher, networking of components | GF82.25-P-0002-02A | ||
| Electric wiring diagram, signal system | Models 202, 208 as of 01.06.97 | PE82.10-P-2200C | |
| Electric wiring diagram, signal system | Model 210 as of 01.03.97 | PE82.10-P-2200A |