Testing and repair work: Passenger cars: Electrical system body - AR82.00-Z-9129AA
MODEL 129
| Removing and installing bulbs of headlamp unit | MODEL 129 except CODE (491) U.S. version except CODE (612b) Xenon headlamp unit | AR82.10-P-1201A | |
| Remove/install bulbs of headlamp unit | MODEL 129 with CODE (612) Xenon headlamp unit | AR82.10-P-1201D | |
| Removing and installing bulbs of headlamp unit | MODEL 129 up to 30.5.98 with CODE (491) USA version | AR82.10-P-1201E | |
| Remove/install lamp unit lens | MODEL 129 except CODE (491) USA version | AR82.10-P-1820A | |
| Remove/install lamp unit lens | MODEL 129 up to 30.5.96 with CODE (491) USA version | AR82.10-P-1820B | |
| Removing and installing lens for fog lamp | MODEL 129 up to 31.8.95 | AR82.10-P-1821A | |
| Removing and installing fog lamp lens | MODEL 129 as of 1.9.95, 170, 208, 215 | AR82.10-P-1821C | |
| Removing and installing bulb for fog lamp | MODEL 129 | AR82.10-P-1825A | |
| Removing and installing fog lamp reflector | MODEL 129 | AR82.10-P-1830A | |
| Removing and installing headlamp reflector | MODEL 129 except CODE (491) U.S. version except CODE (612b) Xenon headlamp unit | AR82.10-P-2850A | |
| Remove/install headlamp reflector | MODEL 129 except CODE (491) USA version with CODE (612) Xenon headlamp unit | AR82.10-P-2850B | |
| Checking pneumatic headlamp range adjustment | MODEL 129 | AR82.10-P-4011A | |
| Removing and installing headlamp range adjustment control module | MODEL 129 up to 30.5.96 with CODE (612b) Xenon headlamp unit | AR82.10-P-4081A | |
| Removing and installing headlamp range adjustment control module | MODEL 129 as of 1.6.96 with CODE (612b) Xenon headlamp unit | AR82.10-P-4081B | |
| Remove/install electric headlamp range adjustment motor | MODEL 129 with CODE (612) Xenon headlamp unit | AR82.10-P-4082B | |
| Removing and installing front axle headlamp range adjustment sensor | MODEL 129 with CODE (612b) Xenon headlamp unit | AR82.10-P-4083C | |
| Removing and installing rear axle headlamp range adjustment sensor | MODEL 129 | AR82.10-P-4084B | |
| Removing and installing actuator in headlamp unit | MODEL 129 except CODE (612b) Xenon headlamp unit | AR82.10-P-4301A | |
| Remove/install control unit with ignition unit (xenon headlamps) | MODEL 129 with CODE (612) Xenon headlamp unit | AR82.10-P-4631C | |
| Removing and installing headlamp unit | MODEL 129 except CODE (612b) Xenon headlamp unit | AR82.10-P-4730A | |
| Remove/install lamp unit | MODEL 129 with CODE (612) Xenon headlamp unit | AR82.10-P-4730B | |
| Removing and installing tail lamp | MODEL 129, 202.01 /02 /12 | AR82.10-P-4905EA | |
| Removing and installing fog lamp | MODEL 129 | AR82.10-P-5103G | |
| Removing and installing license plate lamp | MODEL 129, 202, 210.2 | AR82.10-P-5161EA | |
| Removing and installing center high-mounted stop lamp | MODEL 129 as of 1.6.96 Center high-mounted stop lamp, LED version | AR82.10-P-5375A | |
| Removing and installing center high-mounted stop lamp | MODEL 129 Center high-mounted stop lamp, incandescent bulb version | AR82.10-P-5375B | |
| Removing and installing bulb of center high mounted stop lamp | MODEL 129 up to 30.5.96 Center high-mounted stop lamp, incandescent bulb version | AR82.10-P-5385A | |
| Removing and installing headlamp wiper motor | MODEL 129 | AR82.15-P-5500A | |
| Removing and installing front dome lamp | MODEL 129 | AR82.20-P-0110A | |
| Removing and installing bulb for ashtray illumination | MODEL 129 | AR82.20-P-0130A | |
| Removing and installing bulb of front turn signal lamp | MODEL 129 with CODE (491) U.S. version with combined turn signal/parking lamp | AR82.25-P-1202D | |
| Removing and installing bulb of front turn signal lamp | MODEL 129, 202 | AR82.25-P-1202EA | |
| Check wiper arm and adjust | MODEL 129, 202, 208, 210 | AR82.30-P-6050E | |
| Removing and installing rubber of wiper blade | MODEL 129, 202 | AR82.30-P-6250E | |
| Removing and installing wiper motor | MODEL 129 | AR82.30-P-6800B | |
| Removing and installing wiper linkage | MODEL 129 | AR82.30-P-7600A | |
| Remove/install rain sensor | MODELS 129, 202 as of 1.6.97, 208, 210 with CODE (345a) Rain sensor | AR82.30-P-7700F | |
| Removing and installing radio | MODEL 129... | AR82.60-P-7502A | |
| Remove/install radio | MODEL 129, 163, 168, 170, 202, 208, 210, 414, 463... | AR82.60-P-7502EA | |
| Removing and installing radio | MODEL 129, 170, 202, 208, 210, 461... | AR82.60-P-7502EB | |
| Removing and installing navigation processor (APS) | MODEL 129... | AR82.61-P-7410F | |
| Removing and installing navigation processor APS) | MODEL 129 as of 1.9.95 with CODE (351) Auto-pilot system (APS) | AR82.61-P-7410G | |
| Removing and installing APS radio and navigation operating unit | MODEL 129, 140, 168, 170, 202, 208, 210... | AR82.61-P-7412B | |
| Removing and installing antenna for global positioning system (GPS) on vehicles with APS | MODEL 129... | AR82.61-P-7474D | |
| Removing and installing antenna for global positioning system (GPS) on vehicles with APS | MODEL 129 with telephone and APS, antenna on trunk lid | AR82.61-P-7474E | |
| Removing and installing antenna for global positioning system (GPS) on vehicles with APS | MODEL 129 Antenna on soft top compartment | AR82.61-P-7474F | |
| Removing and installing traffic data memory | MODEL 129 with CODE (351) Auto-pilot system (APS) | AR82.61-P-7483A | |
| Removing and installing loudspeaker amplifier control module | MODEL 129 with CODE (259a) Radio ML 10 with sound system with CODE (810) Sound system | AR82.62-P-7720A | |
| Removing and installing loudspeaker amplifier control module | MODEL 129 with CODE (259) Radio Premium with Bose sound system | AR82.62-P-7720C | |
| Removing and installing receiver/amplifier control module | MODEL 129 | AR82.62-P-7721A | |
| Removing and installing loudspeakers in instrument panel | MODEL 129, 140... | AR82.62-P-7833B | |
| Removing and installing loudspeaker in side paneling (rear) | MODEL 129 | AR82.62-P-7837A | |
| Removing and installing bass speaker | MODEL 129 | AR82.62-P-7839A | |
| Removing and installing loudspeakers in front doors | MODEL 129 | AR82.62-P-7845A | |
| Removing and installing automatic antenna | MODEL 129... | AR82.62-P-8105A | |
| Removing and installing automatic antenna | MODEL 129, 202, 210... | AR82.62-P-8105EA | |
| Removing and installing telescope of automatic antenna | MODEL 129, 202... | AR82.62-P-8200EA | |
| Removing and installing RF antenna lead | MODEL 129 | AR82.62-P-8221A | |
| Removing and installing CD player with changer | MODEL 129 with CODE (819) 6-disc CD changer in trunk | AR82.64-P-7507D | |
| Removing, installing fiber optic cable | MODEL 129... | AR82.70-P-0004D | |
| Removing and installing GSM 1800 MHz network compensator | MODEL 129 as of 1.7.00 with CODE (854) MB portable cellular telephone | AR82.70-P-0010AA | |
| Removing and installing cellular telephone interface | MODEL 129 as of 1.7.00 with CODE (854) MB cellular telephone | AR82.70-P-7379EEE | |
| Removing and installing CTEL transmitter and receiver | MODEL 129 up to 30.6.00 with CODE (316) MB GSM cellular telephone (D2B) | AR82.70-P-8911B | |
| Removing and installing transmitter/receiver | MODEL 129 as of 1.7.00 with CODE (853) MB standard cellular telephone | AR82.70-P-8911BB | |
| Removing and installing transmitter-receiver unit | MODEL 124, 129, 140, 170, 202, 208, 210... | AR82.70-P-8911Z | |
| Removing and installing handset in stowage compartment armrest | MODEL 129 with CODE (274) MB D-network telephone | AR82.70-P-8914A | |
| Removing and installing handset in armrest or stowage compartment | MODEL 129 up to 30.6.00 with CODE (316) MB D-network telephone (D2B) | AR82.70-P-8915C | |
| Removing and installing handset in armrest or stowage compartment | MODEL 129 as of 1.7.00 with CODE (853) MB standard cellular telephone | AR82.70-P-8915CC | |
| Removing and installing handset on center console | MODEL 129 as of 1.7.00 with CODE (853) MB standard cellular telephone | AR82.70-P-8916AA | |
| Removing and installing bracket for cellular telephone | MODEL 129... | AR82.70-P-8918D | |
| Removing and installing bracket for cellular telephone | MODEL 129 as of 1.7.00 with CODE (854) MB cellular telephone | AR82.70-P-8918DD | |
| Removing and installing cradle for cellular telephone | MODEL 129, 170, 202, 208, 210... | AR82.70-P-8918F | |
| Removing and installing bracket for cellular telephone | MODEL 129... | AR82.70-P-8918FF | |
| Removing and installing vehicle interface (cellular telephone) | MODEL 129 up to 30.6.00 with CODE (317) GSM cellular telephone (D2B) | AR82.70-P-8920D | |
| Removing and installing antenna | MODEL 124, 129, 140, 170, 202, 208, 210... | AR82.70-P-8951Z | |
| Removing and installing hands-free system speaker | MODEL 129, 140, 202, 210... | AR82.70-P-8968A | |
| Removing and installing hands-free system microphone | MODEL 124, 129, 140, 170, 202, 208, 210... | AR82.70-P-8969Z | |
| Removing and installing TELE AID emergency call system control module | MODEL 129 with CODE (347) TELE AID emergency call system (D2B) European version | AR82.95-P-0005C | |
| Removing and installing emergency call system control module | MODEL 129 with CODE (348a) Emergency call system with CODE (498) Japanese version | AR82.95-P-0008F | |
| Removing and installing emergency call system control module | MODEL 129 with CODE (348a) Emergency call system with CODE (494a) US version | AR82.95-P-0008H | |
| Authorization for TELE AID | MODEL 129, 140, 170, 202, 208, 210, 220 with SIM card from debitel for D1 GSM network | AR82.95-P-0011A | |
| Carry out authorization for TELE AID | MODELS 129, 140, 170, 202, 208, 210, 220 with SIM card for the D2 GSM network | AR82.95-P-0011B |