ME-SFI ignition system - Check electrics - AD07.61-P-6001C
ENGINES 104.941 /943 /944 /991 /994 as of 1.8.96
ENGINE 104.995 with CODE (494a) USA version with CODE (807) Model year 1997 with CODE (808) Model year 1998 with CODE (498) as of Model Year 97 Japanese version
| Hazard from contact with parts conducting high voltages. | Do not touch parts which conduct high voltages. Persons who wear electronic implants (e.g. heart pacemakers) must not carry out work on the ignition system. | AS15.10-Z-0001-01A | |
| Lethal hazard from being drawn into rotating vehicle parts | Do not reach into rotating parts. Wear closed and close-fitting work clothes. Secure area of rotating vehicle components against unauthorized access. |
AS00.00-Z-0004-01A | |
| Risk of explosion from fuel igniting, risk of poisoning from inhaling and swallowing fuel as well as risk of injury to eyes and skin from contact with fuel. | No fire, sparks, naked flames or smoking. Pour fuels only into suitable and appropriately marked containers. Wear protective clothing when handling fuel. |
AS47.00-Z-0001-01A | |
| Notes regarding the avoidance of damage to the ignition system | Engines 104, 111, 112, 113, 119, 120 with ME-SFI fuel injection and ignition system | AH15.10-P-0002-01D | |
| When disconnecting the couplings at the ME-SFI control, first disconnect the center coupling, and connect the center coupling D last of all on connection. | |||
| Measuring apparatus/test connection column: The numbers entered in brackets such as, e.g. ==> 1.0 (2A) mean: A = Coupling A in the wiring diagram 2 = Bushing 2 in the wiring diagram |
|||
| ME-SFI gasoline injection and ignition system - Diagnosis previous knowledge | AD07.61-P-2000C | ||
| Connection and use of testing equipment | AD00.00-P-1000AZ | ||
| Connect Hand-Held-Tester (HHT), read diagnostic fault code memory out | AD00.00-P-2000-03A | ||
| a | Ignition: OFF | ||
| b | Connect the test lead kit with socket box at the ME-SFI control module (N3/10) according to the connection schematic | AD07.61-P-2000-01A | |
| Check | |||
| 1 | ME-SFI control module terminal 30 - Check ME-SFI ignition system electrics | AD07.61-P-6001-01C | |
| 2 | ME-SFI control module terminal 87 - Check ME-SFI ignition system electrics | AD07.61-P-6001-02C | |
| 3 | Ignition coil (T1/1) - Check ME-SFI ignition system electrics | AD07.61-P-6001-03C | |
| 4 | Ignition coil (T1/2) - Check ME-SFI ignition system electrics | AD07.61-P-6001-04C | |
| 5 | Ignition coil (T1/3) - Check ME-SFI ignition system electrics | AD07.61-P-6001-05C | |
| 6 | Crankshaft position sensor - Check ME-SFI ignition system electrics | AD07.61-P-6001-09C | |
| 7 | Camshaft hall sensor - Check ME-SFI ignition system electrics | AD07.61-P-6001-10C | |
| 8 | Primary voltage (T1/1) - Check ME-SFI ignition system electrics | AD07.61-P-6001-11B | |
| 9 | Primary voltage (T1/2) - Check ME-SFI ignition system electrics | AD07.61-P-6001-12C | |
| 10 | Primary voltage (T1/3) - Check ME-SFI ignition system electrics | AD07.61-P-6001-13C | |
| 11 | Ignition voltage - Check ME-SFI ignition system electrics | AD07.61-P-6001-17C |