LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-30 Preferred >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Mechanical System (VIN Y)) >> Engine Mount Disassembly/Assembly (VIN Y) >> No. 1 Engine Mount >> Notes

No. 1 Engine Mount: Notes

WARNING: This page is about a different variant/trim than selected.
  1. Remove the front under cover No. 2. (See FRONT UNDER COVER No. 2 REMOVAL/INSTALLATION .)
  2. Remove in the order indicated in the table.
  3. Install in the reverse order of removal.
    Fig 1: No. 1 Engine Mount Components Location With Torque Specification
    G16379577Courtesy of MAZDA MOTORS CORP.
    NO. 1 ENGINE MOUNT COMPONENT OPERATIONS

    Component no Refer to
    1 No. 1 engine mount bracket
    (See NO. 1 ENGINE MOUNT INSTALLATION NOTE .)
    2 No. 1 engine mount rubber
    (See NO. 1 ENGINE MOUNT INSTALLATION NOTE .)
scientia non olet · About LEMON Manuals