LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-30 Preferred >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim >> FRONT UNDER COVER No. 2 REMOVAL/INSTALLATION

FRONT UNDER COVER No. 2 REMOVAL/INSTALLATION

  1. Lift up the vehicle.
  2. Remove the bolts and fasteners.
    Fig 1: Front Under Cover No. 2, Bolts And Fasteners With Torque Specification
    G16376708Courtesy of MAZDA MOTORS CORP.
  3. Remove the front under cover No. 2.
  4. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals